User's Manual
Table Of Contents
- Overview
- Using Web Browsers
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > Storage management
- Local storage > Content management
- Appendix
VIVOTEK
58 - User's Manual
Illuminators
Turn on built-in IR illuminator in night mode
Select this to turn on the camera’s onboard IR illuminator when the camera detects low light
condition and enters the night mode.
Anti-overexposure disabled; distance:
5M
Anti-overexposure enabled;
distance: 5M
Anti-overexposure disabled;
distance: 3M
Anti-overexposure enabled;
distance: 3M
The anti-overexposure function is more benecial when the spot of intrusions or an object of your
interest is close to the lens and the IR lights. For example, if an intruder has a chance of getting
near the range of 3 meters, the anti-overexposure can effectively reduce the over-exposure. For a
surveillance area at a greater distance, e.g., 5 meters or farther away, the IR function may not bring
as signicant benets as in close range.
Anti-overexposure: When enabled, the camera automatically adjusts the IR projection to adjacent
objects in order to avoid over-exposure in the night mode.