User Manual

VIVOTEK
User's Manual - 239
© 2019 VIVOTEK INC. All Right Reserved
87
7.10 IR Cut Control
<Not supported anymore>
Group: ircutcontrol (capability__nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_support >
0)
n denotes the value of "capability_nvideoin"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
mode
<Not
recommended to
use this>
auto,
day,
night,
di,
schedule…etc
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_mode"
<product dependent>
6/6
Set IR cut control mode
* We replace this parameter with
“ircutcontrol_c0_mode” when the
version number (httpversion) is equal
or greater than 0312a.
sir
<product
dependent>
<Not
recommended to
use this>
<boolean>
6/6
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_smartir" is 1
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_sir” when
the version number (httpversion) is
equal or greater than 0312a.
daymodebegintime
<Not
recommended to
use this>
00:00~23:59
6/6
Day mode begin time
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_daymodebe
gintime” when the version number
(httpversion) is equal or greater than
0312a.
daymodeendtime
<Not
recommended to
use this>
00:00~23:59
6/6
Day mod end time
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_daymodeen
dtime” when the version number
(httpversion) is equal or greater than
© 2019 VIVOTEK INC. All Right Reserved
88
NAME VALUE SECURITY
(get/set)
DESCRIPTION
0312a.
disableirled
<Not
recommended to
use this>
<boolean> 6/6 Enable/disable built-in IR led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and irled is listed in
"capability_daynight_ illuminators
_builtin_type"
* We replace this parameter with
"ircutcontrol_illuminators_builtin_irle
d_enabled" when the version number
(httpversion) is equal or greater than
0312a.
enableextled
<Not
recommended to
use this>
<boolean> 1/6 Enable/disable external IR led
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0".
* We replace this parameter with
"ircutcontrol_illuminators_external_d
o_enabled" when the version number
(httpversion) is equal or greater than
0312a.
enablewled
<Not
recommended to
use this>
<boolean> 6/6 Enable/disable built-in White led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and whiteled is listed
in "capability_daynight_ illuminators
_builtin_type"
* We replace this parameter with
"ircutcontrol_illuminators_builtin_whi
teled_enabled" when the version
number (httpversion) is equal or
greater than 0312a.
bwmode
<Not
recommended to
use this>
<boolean> 6/6 Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_