User Manual

VIVOTEK
User's Manual - 283
© 2019 VIVOTEK INC. All Right Reserved
131
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
channel. For some dual-stream
products, both streams support ePTZ.
nanystream
0, <positive integer>
0/7
number of any media stream per
channel
iva
<boolean>
0/7
Indicate whether to support
Intelligent Video analysis
whitelight
<Not
recommended to
use this>
<boolean>
0/7
Indicate whether to support white
light led.
* We replace this parameter with
"capability_daynight_c<0~(n-1)>_built
inwled" when the version number
(httpversion) is equal or greater than
0309d.
iris
<boolean>
0/7
Indicate whether to support iris
control.
supportsd
<boolean>
0/7
Indicate whether to support local
storage.
fisheye
<boolean>
0/7
The parameter is used to determine
whether the product is fisheye or not.
tampering
<boolean>
0/7
Indicate whether to support
tampering detection.
tamperingmode
tamper,toodark,toobri
ght,tooblurry
0/7
Available tampering mode list.
* Only available when
"capability_tampering" is 1.
adaptiverecording
<boolean>
0/7
Indicate whether to support adaptive
recording.
adaptivestreaming
<boolean>
0/7
Indicate whether to support adaptive
streaming.
supporttriggertype
s
seq,boot,motion,netw
orkfail,recnotify,tamp
ering,vi,vadp,di,volala
rm,temperature,pir,
visignal,
backup,smartsd,
shockalarm,virestore
<product dependent>
0/7
list all the trigger types which are
supported in the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection
failure
"recnotify" = Recording notification.
© 2019 VIVOTEK INC. All Right Reserved
132
NAME VALUE SECURITY
(get/set)
DESCRIPTION
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger.
"di"= Digital input.
"volalarm" = Audio detection.
"temperature" = Temperature
detection.
"pir" = PIR detection.
"visignal" = Video input signal loss.
"backup" = Backing up recorded files.
"smartsd" = Lifetime detection of SD
card.
"shockalarm" = Shock detection.
"virestore" = Video input signal
restore.
* Only available when [httpversion] >=
0301a
media_num 0,<positive integer> 0/7 Number of media number.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0311c.
storage_dbenabled <boolean> 0/7 Media files are indexed in database.
protocol_https < boolean > 0/7 Indicate whether to support HTTP
over SSL.
protocol_rtsp < boolean > 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0/7 Indicate whether to support SIP.
protocol_maxconn
ection
<positive integer> 0/7 The maximum number of allowed
simultaneous connections.
protocol_maxgenc
onnection
<Not
Recommended to
use this>
<positive integer> 0/7 The maximum general streaming
connections .
* We replaced this parameter with
“capability_protocol_maxconnection”
when the version number
(httpversion) is equal or greater than
0311c.