User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Smart VCA
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > Storage management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 285
© 2019 VIVOTEK INC. All Right Reserved
133
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
protocol_rtp_multi
cast_scalable
<boolean>
0/7
Indicate whether to support scalable
multicast.
protocol_rtp_multi
cast_backchannel
<boolean>
0/7
Indicate whether to support
backchannel multicast.
protocol_rtp_tcp
<boolean>
0/7
Indicate whether to support RTP over
T C P.
protocol_rtp_http
<boolean>
0/7
Indicate whether to support RTP over
H T T P.
protocol_spush_mj
peg
<boolean>
0/7
Indicate whether to support server
push MJPEG.
protocol_snmp
<boolean>
0/7
Indicate whether to support SNMP.
protocol_ipv6
<boolean>
0/7
Indicate whether to support IPv6.
protocol_pppoe
<boolean>
0/7
Indicate whether to support PPPoE.
protocol_ieee8021
x
<boolean>
0/7
Indicate whether to support
IEEE802.1x.
protocol_qos_cos
<boolean>
0/7
Indicate whether to support CoS.
protocol_qos_dscp
<boolean>
0/7
Indicate whether to support
QoS/DSCP.
protocol_ddns
<boolean>
0/7
Indicate whether to support DDNS.
videoin_type
0, 1, 2
0/7
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_nresolutio
n
<positive integer>
0/7
This equals
"capability_videoin_c0_nresolution".
* This is kept for compatibility.
videoin_resolution
A list of <WxH>
<product dependent>
0/7
This equals
"capability_videoin_c0_resolution".
* This is kept for compatibility.
videoin_maxframer
ate
A list of <Integer>
0/7
This equals
"capability_videoin_c0_maxframerate
".
* This is kept for compatibility.
videoin_mjpeg_ma
A list of <Integer> and
0/7
This equals
© 2019 VIVOTEK INC. All Right Reserved
134
NAME VALUE SECURITY
(get/set)
DESCRIPTION
xframerate "-" "capability_videoin_c0_mjpeg_maxfra
merate".
* This is kept for compatibility.
videoin_h264_max
framerate
A list of <Integer> and
"-"
0/7 This equals
"capability_videoin_c0_h264_maxfra
merate".
* This is kept for compatibility.
videoin_codec mjpeg, h264, h265
<product dependent>
0/7 Available codec of a device, split by
comma.
The sequence is not limited.
EX:
FD8183 supports H.264 and MJPEG,
then this is "mjpeg,h264".
IP9171 supports H.264, MJPEG and
H.265, then this is "mjpeg,h264,h265"
videoin_streamcod
ec
A list of <Positive
Integer>
0/7 This equals
"capability_videoin_c0_streamcodec".
* This is kept for compatibility.
videoin_flexiblebitr
ate
<boolean> 0/7 Indicate whether to support
flexible bit rate control.
videoout_codec A list of the available
codec types separated
by commas
<product dependent>
0/7 Available codec list.
"-": not supported
timeshift <boolean> 0/7 Indicate whether to support time shift
caching stream.
audio_aec <boolean> 0/7 Indicate whether to support acoustic
echo cancellation.
audio_aecmode auto,
manual
0/7 Indicate the acoustic echo
cancellation control mode.
"auto": control by camera
automatically.
"manual": Manually turn on/off the
control mode.
*Only available when
"capability_audio_aec" is "1".