User Manual

VIVOTEK
User's Manual - 303
© 2019 VIVOTEK INC. All Right Reserved
151
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
blackwhitemode
<boolean>
0/7
Indicate whether to support
automatically switch to Black & White
display during the night mode.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
ircutsensitivity_type
<string>
0/7
Indicate the cgi interface of
"ircutcontrol_sensitivity".
"options": the value of
"ircutcontrol_sensitivity" parameter is
"low, normal,high".
"normalize": the value of
"ircutcontrol_sensitivity" parameter is
"1~100"
"-":not support
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
ircutsensitivity_supportle
vel
0,
<positive integer>
0/7
The value indicate the support strength
level of ircutsensitivity.
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1 and
"capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type" is not "-".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
© 2019 VIVOTEK INC. All Right Reserved
152
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
extled_interface do
<product
dependent>
0/7 The device interface of external IR led:
"do": digital output
* Only available when
"capability_daynight_c<0~(n-1)>_extern
alir" is 1
* We replaced this parameter with
“capability_daynight_illuminators_exter
nal_interface” when the version
number (httpversion) is equal or greater
than 0312a.
spectrum_support <boolean> 0/7
Indicate whether to support proposed a
brightness enhancement
method based
on CCM(Color Correction Matrix) model
to improve the brightness effect of the
images if the IR and blue light exists.
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1
* We replaced this parameter with
“capability_daynight_illuminators_spect
rum_support” when the version
number (httpversion) is equal or greater
than 0312a.