User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Smart VCA
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > Storage management
- Local storage > Content management
- Appendix
VIVOTEK
364 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
213
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
rotatespeed 1 ~ 5 1/4 Rotate speed (only for Fisheye series)
* Only available when
"capability_fisheye" is 1 and
"capability_fisheyelocaldewarp_c<0~(n-1
)>" is 0
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the index of video stream
which support ePTZ if capability_eptz > 0; m is the index of stream number if capability_fisheye = 1.
(capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
patrolseq string[120] 1/4 The patrol sequence of ePTZ. All the
patrol position indexes will be separated
by ","
patroldwelling string[160] 1/4 The dwelling time (unit: second) of each
patrol point, separated by “,”.
preset_i<0~19>_name string[40] 1/4 Name of ePTZ preset.
* Only available when
"capability_fisheye" is 1
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
preset_i<0~19>_pos < W, H >
<product
dependent>
1/4 Left-top corner coordinate of the preset.
* Only available when
"capability_fisheye" is 1
1/7 Left-top corner coordinate of the preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
preset_i<0~19>_size <WxH>
<product
dependent>
1/4 Width and height of the preset.
* Only available when
"capability_fisheye" is 1