User Manual

VIVOTEK
User's Manual - 395
© 2019 VIVOTEK INC. All Right Reserved
243
PARAMETER
VALUE
DESCRIPTION
y
<integer>
movement
w
<integer>
The scaled area size
h
<integer>
resolution
<window size>
The resolution of streaming.
vx
<integer>
The direction of movement, used for joystick control.
vy
<integer>
vs
0 ~ 7
Set the speed of movement, “0” means stop.
x
<integer>
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y
<integer>
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize
<window size>
The size of plug-in (ActiveX)window in web page
resolution
<window size>
The resolution of streaming.
stretch
<boolean>
0 indicates that it usesresolution(streaming size) as the
range of the coordinate system.
1 indicates that it usesvideosize(plug-in size) as the range
of the coordinate system.
speedpan
-5 ~ 5
Set the pan speed.
speedtilt
-5 ~ 5
Set the tilt speed.
speedzoom
-5 ~ 5
Set the zoom speed.
speedapp
1 ~ 5
Set the auto pan/patrol speed.
return
<return page>
Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
© 2019 VIVOTEK INC. All Right Reserved
244
8.8 ePTZ Recall (capability_eptz > 0 and capability_fisheye = 0)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eRecall.cgi?channel=<value>&stream=<value>&
recall=<value>[&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
recall Text string less than
40 characters
One of the present positions to recall.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
8.9 ePTZ Preset Locations (capability_eptz > 0 and
capability_fisheye = 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.