User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Smart VCA
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 11
Some of the sufx syntax used in model naming are listed below:
E w/ heater for extreme weather
Fx Focal length w/ number
T w/ Remote focus lens
R w/ PoE repeater
H w/ High Dynamic Range functionality
M Manual focus lens
NOTE:
IMPORTANT:
The E model camera comes with an embedded heater and requires an 802.3at PoE
switch.
1
2
3
4
6
5
8
7
10
LAN/PoE
100~240V
AC
ON
OFF
9
GE LAN GE LAN
802.3af or 802.3at
Max. Power Consumption (via PoE)
Model Watts Voltage Amp
FD9389-EHTV 23.55 42.5 ~ 57 0.55 ~ 0.41
FD9389-EHMV 21.4 42.5 ~ 57 0.50 ~ 0.38
FD9389-EHV 21.8 42.5 ~ 57 0.51 ~ 0.38
FD9389-HTV
FD9389-HTV (w/o cable)
10.45 37 ~ 57 0.28 ~ 0.18
FD9389-HMV
FD9389-HMV (w/o cable)
8.3 37 ~ 57 0.22 ~ 0.15
FD9389-HV
FD9389-HV(w/o cable)
8.7 37 ~ 57 0.24 ~ 0.15
Max. Power Consumption (via PoE)
Model Watts Voltage Amp
FD9189-HT 10.45 37 ~ 57 0.28 ~ 0.18
FD9189-HM 8.3 37 ~ 57 0.22 ~ 0.15
FD9189-H 8.7 37 ~ 57 0.24 ~ 0.15