User Manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Smart VCA
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Shock detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
186 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
44
7.6.8 RTSP
Subgroup of network: rtsp (capability_protocol_rtsp > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
port 554, 1025 ~ 65535 1/6 RTSP port.
(capability_protocol_rtsp=1)
anonymousviewing <boolean> 1/6 Enable anoymous streaming
viewing.
authmode disable,
basic,
digest
1/6 RTSP authentication mode.
(capability_protocol_rtsp=1)
s<0~(capability_nmed
iastream*capability_n
videoin)-1)>_accessna
me
<product dependent>
string[32]
1/6 RTSP access name for
channel/stream N, N= 1~
capability_nmediastream.
(capability_protocol_spush_mjpeg
=1 and capability_nmediastream > 0)
The value are shown as
live1s1.sdp = c0_s0_accessname,
(channel1stream1)
live1s2.sdp = c0_s1_accessname,
(channel1stream2)
live1s3.sdp = c0_s2_accessname,
(channel1stream3)
live1s4.sdp = c0_s3_accessname,
(channel1stream4)
etc.