User Manual

VIVOTEK
User's Manual - 189
© 2019 VIVOTEK INC. All Right Reserved
46
7.6.10 SIP Port
Subgroup of network: sip (capability_protocol_sip> 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
port 1025 ~ 65535 1/6 SIP port.
7.6.11 RTP Port
Subgroup of network: rtp
NAME VALUE SECURITY
(get/set)
DESCRIPTION
videoport 1025 ~ 65535 6/6 Video channel port for RTP.
audioport 1025 ~ 65535 6/6 Audio channel port for RTP.
metadataport 1025 ~ 65535 6/6 Metadata channel port for RTP.
7.6.12 PPPoE
Subgroup of network: pppoe (capability_protocol_pppoe > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
user string[128] 6/6 PPPoE account user name.
pass password[64] 7/6 PPPoE account password.
7.7IP Filter
Group: ipfilter
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable access list filtering.
admin_enable <boolean> 6/6 Enable administrator IP address.
admin_ip string[43] 6/6 Administrator IP address.
maxconnection 1~
"capability_protoc
ol_maxconnection"
6/6 Maximum number of (s).
© 2019 VIVOTEK INC. All Right Reserved
47
NAME VALUE SECURITY
(get/set)
DESCRIPTION
type 0, 1 6/6 Ipfilter policy :
0 => allow
1 => deny
ipv4list_i<0~9> Single address: <ip
address>
Network address:
<ip address /
network mask>
Range
address:<start ip
address - end ip
address>
6/6 IPv4 address list.
ipv6list_i<0~9> string[43] 6/6 IPv6 address list.
7.8Video Input
Group: videoin
NAME VALUE SECURITY
(get/set)
DESCRIPTION
cmosfreq 50, 60 4/4 CMOS frequency.
* Only available when
capability_videoin_type is 2.
whitebalance
<product dependent>
auto,
panorama,
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values
are listed in
"capability_image_
c<0~(n-1)>_wbmo
4/4 Modes of white balance.
"auto": Auto white balance
"panorama": indicates that camera
would try to balance the white
balance effect of every sensor.
"rbgain": Use rgain and bgain to set
white balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the
current values which is got from