User Manual

VIVOTEK
User's Manual - 227
© 2019 VIVOTEK INC. All Right Reserved
84
NAME VALUE SECURITY
(get/set)
DESCRIPTION
_ircutsensitivity_type" is not "-".
spectrum_mode visible,
ir,
irenhanced,
blueenhanced
<product dependent>
6/6 Set spectrum method .
* Only available when
"capability_daynight_illuminators_
spectrum _support > 0".
7.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness
<Not
recommended to
use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
contrast
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "contrast" with
"contrastpercent ".
* This parameter will not be used
© 2019 VIVOTEK INC. All Right Reserved
85
NAME VALUE SECURITY
(get/set)
DESCRIPTION
after the version number (httpversion)
is equal or greater than 0400a.
saturation
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less saturation <-> 5: More
saturation
100: Use "
image_c<n>_saturationpercent"
* Only available when bit 2 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "saturation" with
"saturationpercent".
* This parameter will not be used
after
the version number (httpversion)
is equal or greater than 0400a.
sharpness
<Not
recommended to
use this>
-3~3,100 4/4 -3: Softer <-> 3: Sharper
100: Use "
image_c<0~(n-1)>_sharpnesspercent"
* Only available when bit 3 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "sharpness" with
"sharpnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
brightnesspercent 0~100 4/4 Set brightness in the normalized
range.
0: Darker <-> 100: Bright
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
contrastpercent 0~100 4/4 Set contrast in the normalized range.
0: Less contrast <-> 100: More
contrast
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse