User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > DDNS
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
158 - User's Manual
“ratecontrolmode”.
s<0~(m-1)>_forcei 1 N/A 7/6 Force I frame.
s<0~(m-2)>_fisheyede
warpmode
‘1O, 1P, 2P,
1R, 4R’ for
ceiling/floor
mount
‘1O, 1P, 1R,
4R’ for wall
mount
1O 1/4 Local dewarp mode.
“1O” is original mode
(disable).
Supported dewarp
mode is different by
mount type.
(videoin_c<n>_mount
type)
Supported mode list
could be extracted from
(capability_videoin_c<
n>_localdewarp_typec
eilingmount) and
(capability_videoin_c<
n>_localdewarp_typew
allmount)
wdrc_mode 0~2 0 4/4 WDR enhanced.
0: off
1: Sensitivity low
2: Sensitivity high
wdrc_strength 0~2 1 4/4 WDR enhanced.
0: low
1: medium
2: high
mounttype ceiling, wall,
floor
ceiling 1/6 Mount type
enableimgreport 0, 1 0 1/6 Image report
enablewatermark 0, 1 0 1/6 Watermark