User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > DDNS
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
162 - User's Manual
profile_i0_saturation -5~5,100 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
profile_i0_saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3, 100 0 4/4 Adjust sharpness of image
according to mode settings.
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
profile_i0_gammacurve 0~100 0 4/4 Gamma curve
profile_i0_lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_wdrcstrength 0~2 1 4/4 WDR enhanced
0: low
1: medium
2: high
profile_i0_wdrcmode 0~2 0 4/4 WDR enhanced
0: off
1: Sensitivity low
2: Sensitivity high
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5,100 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrast -5 ~ 5 0 4/4 Adjust contrast of image