User manual

VIVOTEK
User's Manual - 115
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
If you want to congure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition or for the detection to occur at a different period of time), please click Prole to open
the Motion Detection Prole Settings page as shown below. Another three motion detection windows can
be congured on this page.
Please follow the steps beolw to set up a prole:
1. Create a new motion detection window.
2. Click the Prole mode tab.
3. Select the applicable mode: Night mode or Schedule mode. Please manually enter a time range if you
choose Schedule mode.
4. Click Save to enable the settings and click Close to exit the page.
Larger than the
min. item size
Photos or videos can be captured instantly and congured to be sent to a remote server (via an Email or
FTP server). For more information on how to congure an event setting, please refer to Event settings on
page 99.