User manual

VIVOTEK

92 - User's Manual

■ Disconnect: If you want to break off the current connections, please select them and click this

button. Please note that those checked connections will only be disconnected temporarily and will

automatically try to re-link again (IE Explorer or Quick Time Player).

Enable access list ltering: Check this item and click Save if you want to enable the access list ltering

function.

Filter

Filter type: Select Allow or Deny as the lter type. If you choose Allow Type, only those clients whose

IP addresses are on the Access List below can access the Network Camera, and the others cannot

access. On the contrary, if you choose Deny Type, those clients whose IP addresses are on the Access

List below will not be allowed to access the Network Camera, and the others can access.

Then you can Add a rule to the following Access List. Please note that the IPv6 access list column

will not be displayed unless you enable IPv6 on the Network page. For more information about IPv6

Settings, please refer to Network > Enable IPv6 on page 69 for detailed information.

There are three types of rules:

Single: This rule allows the user to add an IP address to the Allowed/Denied list.

For example: