Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 37
1O (Original) Display mode:
When mounted on a ceiling, the sheye camera can
cover an approximate of 64 m² surveillance area (installed
at a height of approximately 3 meters), while still keeping
details in videos with recognizable facial features of
people trafcking through the area.
The 1O view is especially adequate for taking an over-
view glimpse of the surveillance area when mounted on the
ceiling.
1O View (Original View)
180° Hemispheric
Swipe to scroll horizontally
1P (Single Panoramic) Display mode:
With image correction algorithms in rmware, the hemispheric image is transformed into a rectilinear
stripe in the 1P display mode. Viewers can use the PTZ panel or simply use mouse swipe to quickly
move through the 360º panoramic view. (Mouse control on the Panoramic view is available with the
Ceiling mount type.)
When mounted on a wall, this mode can cover a 180º overview from side to side, e.g., on the entrance of
a building or a corridor.
Note that the 1P view is apt for an overview, the Zoom in/out function does not apply in this mode.