User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
- Appendix
VIVOTEK
User's Manual - 17
11. Connect the Ethernet connector and secure the top of the silicone seal to the routing hole.
You may need to adjust its position.
11. Connect the Ethernet connector and secure the top of the silicone seal to the routing hole.
You may need to adjust its position.
12. Pull the cable slightly backward. Please do not leave the edge of center hole folded toward
the inside of the camera. Doing so will compromise its waterproof feature.