User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
 
- Appendix
VIVOTEK
User's Manual - 223  
external microphone (The related bit of 
"capability_audio_extmic" is equal to 1). 
mute  0, 1  1/4  0: Mute off 
1: Mute on 
gain 
<Not recommended to use 
this> 
0~100  4/4  Gain of input. 
(audioin_c<0~(n-1)>_source = linein) 
* Reserved for compatibility, and suggest don't 
use this since the version number 
(httpversion) is equal or greater than 0301a. 
* We replace "gain" with "volume_internal" 
and "volume_external". More details, please 
refer the parameter description of 
"volume_internal" and "volume_external". 
boostmic 
<Not recommended to use 
this> 
0~100  4/4  Enable microphone boost. 
Gain of input. 
(audioin_c<0~(n-1)>_source = micin) 
* Reserved for compatibility, and suggest don't 
use this since the version number 
(httpversion) is equal or greater than 0301a. 
* We replace "boostmic" with 
"volume_internal" and "volume_external". 
More details, please refer the parameter 
description of "volume_internal" and 
"volume_external". 
s0_codectype  aac4, gamr, g711, 
g726 
(Available codec are 
listed in 
"capability_audioin_
codec") 
4/4  Set audio codec type for input. 
aac4: Advanced Audio Coding (AAC) 
gamr: Adaptive Multi-Rate (AMR)   
g711: G.711 
g726: G.726 
s0_aac4_bitrate  16000, 
32000, 
48000, 
64000, 
96000, 
128000 
4/4  Set AAC4 bitrate in bps. 
* Only available if AAC is supported. 
s0_gamr_bitrate  4750,  4/4  AMR encoded bitrate in bps. 










