User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
 
- Appendix
VIVOTEK
User's Manual - 245  
dependent> 
* This is kept for compatibility.
videoin_maxframerate  A list of <Integer>  0/7  This equals 
"capability_videoin_c0_maxframerate". 
* This is kept for compatibility. 
videoin_mjpeg_maxframe
rate 
A list of <Integer> 
and "-" 
0/7  This equals 
"capability_videoin_c0_mjpeg_maxframerate
".
* This is kept for compatibility.
videoin_h264_maxframer
ate
A list of <Integer> 
and "-" 
0/7  This equals 
"capability_videoin_c0_h264_maxframerate".
* This is kept for compatibility.
videoin_codec  mjpeg, h264, h265 
<product
dependent> 
0/7  Available codec of a device, split by comma. 
The sequence is not limited. 
EX:
FD8183 supports H.264 and MJPEG, then this 
is "mjpeg,h264". 
IP9171 supports H.264, MJPEG and H.265, 
then this is "mjpeg,h264,h265"
videoin_streamcodec  A list of <Positive 
Integer> 
0/7  This equals 
"capability_videoin_c0_streamcodec". 
* This is kept for compatibility. 
videoin_flexiblebitrate  <boolean>  0/7  Indicate whether to support 
flexible bit rate control.
videoout_codec  -, ntsc, pal  0/7  Current output information about video out. 
1st element for 1st video-out, 2nd element for 
2nd video-out, and so on. The number of 
element depends on "capability_nvideooout".
"-": Video-out is not available 
ntsc: NTSC analog output   
pal: PAL analog output 
Ex:
"nvideoout"=0, "videoout_codec"=- 
"nvideoout"=1 with NTSC, 










