User Manual
Table Of Contents
- Software Installation on page 10
- Overview
- Network Deployment
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > QoS (Quality of Service)
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- Security > IEEE 802.1x
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Storage
- Storage > SD card management
- Storage > NAS management
- Storage > Content management
 
- Appendix
VIVOTEK
User's Manual - 293  
maxduration  60~3600  6/6  Unit: Second 
When this condition is reached, recording file 
is truncated. 
adaptive_enable  <boolean>  6/6  Indicate whether the adaptive recording is 
enabled 
adaptive_preevent  0~9  6/6  Indicate when is the adaptive recording 
started before the event trigger point 
(seconds) 
adaptive_postevent  0~10  6/6  Indicate when is the adaptive recording 
stopped after the event trigger point 
(seconds) 
7.31 HTTPS
Group: https (capability.protocol.https > 0) 
NAME VALUE  SECURITY 
(get/set) 
DESCRIPTION 
enable  <boolean>  6/6  To enable or disable secure HTTP. 
policy  <Boolean>  6/6  If the value is 1, it will force HTTP connection 
redirect to HTTPS connection 
method auto, 
manual, 
install 
6/6  auto =>Create self-signed certificate 
automatically. 
manual =>Create self-signed certificate 
manually. 
install =>Create certificate request and install.
status  -3 ~ 1  6/6  Specify the https status. 
-3= Certificate not installed 
-2 = Invalid public key 
-1 = Waiting for certificate 
0= Not installed 
1 = Active 
countryname  string[2]  6/6  Country name in the certificate information. 
stateorprovincename  string[128]  6/6  State or province name in the certificate 
information. 
localityname  string[128]  6/6  The locality name in thecertificate information.
organizationname string[64] 
VIVOTEK Inc. 
6/6  Organization name in the certificate 
information. 
unit string[64] 
VIVOTEK Inc. 
6/6  Organizational unit name in thecertificate 
information. 










