User's Manual

VIVOTEK
User's Manual - 225
© 2020 VIVOTEK INC. All Right Reserved
76
NAME VALUE SECURITY(
get/set)
DESCRIPTION
* Only available when
"capability_image_c<0~(n-1)>_aespee
d" is 1 and
"capability_image_c<0~(n-1)>_aespee
dsupportsensitivity" is 1.
flickerless
<product
dependent>
<boolean> 4/4 Turn on(1) or turn off(0) the flickerless
mode
* Only available when
"capability_image_c<0~(n-1)>_flickerl
ess" is 1.
mounttype
ceiling, wall, floor
1/6
Hardware installation.
* Only available when
"capability_videoin_c<0~(n-1)>_moun
ttype" != "-".
enablewaterm
ark
<product
dependent>
0, 1 1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
s<0~(m-2)>_fis
heyedewarpm
ode
<product
dependent>
‘1O, 1P, 2P, 1R, 4R’ for
ceiling/floor mount
‘1O, 1P, 1R, 4R’ for wall
mount
<product dependent>
1/4
Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is different
by mount type.
(videoin_c<0~(n-1)>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<0~(n-1)>_locald
ewarp_typeceilingmount) and
(capability_videoin_c<0~(n-1)>_locald
ewarp_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2 (capability_smartstream_support=1
and capability_smartstream_version>=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2 (capability_smartstream_support=1,
© 2020 VIVOTEK INC. All Right Reserved
77
capability_smartstream_version>=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
4/4
Enable or Disable smart codec
function
mode autotracking,manual,hybri
d
4/4 Set Smart stream mode
"autotracking": only available when
"capability_smartstream_mode_autot
racking" is 1.
"manual": only available when
"capability_smartstream_mode_man
ual" is 1.
"hybrid": only available when
"capability_smartstream_mode_hybri
d" is 1.
qualitypriority
-5,-4,-3,-2,-1,1,2,3,4,5
4/4
The differential value of Q between
the regions of interest (ROI) and the
areas of non-interest (non-ROI) of the
display image.
If the value is a positive number, the
video quality of ROI is better than the
non-ROI areas. The level is from 1 to
5. Level 5 is the maximum level of the
quality difference between the ROI
and non-ROI areas.
If the value is a negative number, the
video quality of non-ROI areas is
better than the ROI. The level is from
-1 to -5. Level -5 is the maximum level
of the quality difference between the
ROI and non-ROI areas.
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2_win_i<0~(k-1)>
(capability_smartstream_support=1, capability_smartstream_version>=2.0 and
capability_smartstream_mode_manual = 1)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2_win_i<0~(k-1)>
(capability_smartstream_support=1, capability_smartstream_version>=2.0 and h265 is listed in