User's Manual

VIVOTEK
User's Manual - 373
© 2020 VIVOTEK INC. All Right Reserved
224
NAME VALUE SECURITY
(get/set)
DESCRIPTION
preset_i<0~(k-1)>_name
string[40]
1/4
Name of the preset location.
preset_i<0~(k-1)>_zoom capability_ptz_
c<0~(n-1)>_min
zoom ~
capability_ptz_
c<0~(n-1)>_ma
xzoom
1/4 Zoom position at each preset location.
preset_i<0~(k-1)>_focus
capability_ptz_
c<0~(n-1)>_min
focus ~
capability_ptz_
c<0~(n-1)>_ma
xfocus
1/4
Focus position at each preset location.
preset_i<0~(k-1)>_
dwelling
0 ~ 999 1/4 The dwelling time of each preset
location
* only available when
capability_camctrl_c0_rs485=2
preset_i<0~(k-1)>_focus
setting
sync,
fixcurrent
1/4
The focus mode of each preset, which is
essential and should be grouped with
“preset_i<0~(k-1)>_name.”
* We support this parameter when the
version number (httpversion) is equal
or greater than 0305b.
patrolseq string[120] 1/4 (For external device)
The indexes of patrol points, separated
by “,”
patroldwelling
string[160]
1/4
(For external device)
The dwelling time of each patrol point,
separated by “,”
* only available when
capability_camctrl_c0_rs485=2
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome
<boolean>
1/4
This field tells system to use default
home position or not.
axisz capability_ptz_ 1/4 Custom home zoom position.
© 2020 VIVOTEK INC. All Right Reserved
225
NAME VALUE SECURITY
(get/set)
DESCRIPTION
c<0~(n-1)>_min
zoom ~
capability_ptz_
c<0~(n-1)>_ma
xzoom
axisf capability_ptz_
c<0~(n-1)>_min
focus ~
capability_ptz_
c<0~(n-1)>_ma
xfocus
1/4 Custom home focus position.
digitalzoom
<boolean>
1/4
Enable/disable digital zoom
zoomenhance <boolean> 1/4 Enable /disable zoom enhancement
returnhome
<boolean>
1/4
Enable/disable return home while idle.
returnhomeinterval 1~999 1/4 While idle over this time interval, idle
action will be taken.
idleaction_enable
<boolean>
1/4
Enable/disable idle action while idle
idleaction_type home 1/4 This field tells what kind of action
should be taken while idle.
idleaction_interval
1~999
1/4
While idle over this time interval, idle
action will be taken.
PLEASE REFER TO PTZ CONTROL API
7.42 Camera PTZ Control (SD Series)
Group: camctrl_c<0~(n-1)> for n channel products (the bit7 of capability_ptzenabled is 0 and the
bit4 of capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ccdtype string[16] 6/7 (Internal used, read only)
motortype
string[16]
6/7
(Internal used, read only)
cameraid 1 ~ 255 1/4 Camera ID controlling external
PTZ camera.
Note: