User's Manual

VIVOTEK
User's Manual - 375
© 2020 VIVOTEK INC. All Right Reserved
226
NAME VALUE SECURITY
(get/set)
DESCRIPTION
Please set your speed dome to
the appropriate baud rate, and
Camera ID, e.g. 2400bps, camera
ID 1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera
will only accept the inputs with
the corresponding ID.
panspeed -5 ~ 5 1/4 Pan speed
tiltspeed
-5 ~ 5
1/4
Tilt speed
zoomspeed -5 ~ 5 1/4 Zoom speed
autospeed
-5 ~ 5
1/4
Auto pan speed
focusspeed -5 ~ 5 1/4 Auto focus speed
focusmode
auto,onetimeauto,sp
otlight,manual
* Available values are
listed in
"capability_camctrl_c
<0~(n-1)>_focusmod
e"
1/4
Indicate the focus control mode.
preset_i<0~(k-1)>_name string[40] 1/4 Name of the preset location.
preset_i<0~(k-1)>_pan
capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan
1/4
Pan position at each preset
location.
preset_i<0~(k-1)>_tilt capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt
1/4 Tilt position at each preset
location.
preset_i<0~(k-1)>_zoom
capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4
Zoom position at each preset
location.
© 2020 VIVOTEK INC. All Right Reserved
227
NAME VALUE SECURITY
(get/set)
DESCRIPTION
preset_i<0~(k-1)>_focus
capability_ptz_c<0~(
n-1)>_minfocus ~
capability_ptz_c<0~(
n-1)>_maxfocus
1/4
Focus position at each preset
location.
preset_i<0~(k-1)>_focus
setting
sync,
fixcurrent
1/4 The focus mode of each preset,
which is essential and should be
grouped with
“preset_i<0~(k-1)>_name.”
* We support this parameter
when the version number
(httpversion) is equal or greater
than 0305b.
preset_i<0~(k-1)>_fliped
<boolean>
1/4
Flip side at each preset location.
patrol_i<0~39>_name string[40] 1/4 (For internal device)
The name of patrol location
patrol_i<0~39>_
dwelling
0 ~ 999
1/4
(For internal device)
The dwelling time of each patrol
location
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome
<boolean>
1/4
This field tells system to use
default home position or not.
axisx capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan
1/4 Custom home pan position.
axisy
capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt
1/4
Custom home tilt position.
axisz capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4 Custom home zoom position.
axisf
capability_ptz_c<0~(
n-1)>_minfocus ~
1/4
Custom home focus position.