User's Manual

VIVOTEK
User's Manual - 387
© 2020 VIVOTEK INC. All Right Reserved
238
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
audioconfiguration_so
urce
c<0~(n-1)>s0
* n denotes the value
of
"capability_naudioin"
1/6
The audioconfiguration source for the
profile.
Ex. audioconfiguration_source=
c<0~(n-1)>s0 indicates audio stream of
channel n and stream 1 is selected for
the profile.
* Only available when
capability_naudioin > 0
metadataconfiguratio
n_enable
<boolean> 1/6 To enable the selected
metadataconfiguration source for the
profile.
metadataconfiguratio
n_source
c<0~(n-1)>s0
* n denotes the value
of
"capability_nvideoin"
1/6
The metadataconfiguration source for
the profile
Ex. metadataconfiguration_source=
c<0~(n-1)>s0 indicates metadata
stream of channel n and stream 1 is
selected for the profile.
7.53 Multicast Settings for Metadata Streaming
Group: metadata_c<0~(n-1)>_s0_multicast (capability_media_streamprofiles_support = 1)
n denotes the value of "capability_nvideoin"
NAME
VALUE
SECURITY(
get/set)
DESCRIPTION
ipaddress <ip address> 4/4 Multicast metadata IP address.
port
1025 ~ 65535
4/4
Multicast metadata port.
ipversion IPv4, IPv6 4/4 The version of internet protocol.
ttl
1 ~ 255
4/4
Multicast metadata time to live value.
© 2020 VIVOTEK INC. All Right Reserved
239
8. Useful Functions
8.1 Drive the Digital Output (capability_ndo > 0)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<value> [&do2=<value>]
[&do3=<value>][&do4=<value>]
Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state,
and trigger time is indicated in seconds.
PARAMETER VALUE DESCRIPTION
do<num>
state[trigger time]
Where "state" is 0, 1.
“0” means inactive or
normal state while
“1” means active or
triggered state.
Where "trigger time"
is reset time after
state change.
Ex: do1=1
Setting digital output 1 to trigger state.
Ex: do1=0[30]
Setting digital output 1 to normal state, waiting 30
seconds, setting it to trigger state.
Example: Drive the digital output 1 to triggered state, reset do0 after 20 seconds and redirect to an
empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do1=1[20]
8.2 Query Status of the Digital Input (capability_ndi > 0)
Note: This request requires Viewer privileges
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]
If no parameter is specified, all of the digital input statuses will be returned.