User manual
Table Of Contents
- Overview
- Ready to Use
- Software Installation
- Accessing the Network Camera
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Tampering detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
292 - User's Manual
key4 password [26] 6/6 WEP key4 for encryption.
* Only valid when "wireless_encrypt" is "wep"
algorithm AES, TKIP 6/6 Algorithm
* Only valid when "wireless_encrypt" is "wpa" or
"wpa2"
presharedkey password [64] 6/6 WPA/WPA2PSK mode pre-shared key.
* Only valid when "wireless_encrypt" is "wpa" or
"wpa2"
7.50 Shock detection
Group: shock_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin" (capability_peripheral_c<0~(n-1)>_shockdetection_support > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
alarm_enable <boolean> 4/4 Enable shock detection's alarm.
alarm_level 1~100 4/4 The value indicate the support strength level of
shock detection's alarm.