User`s manual

User’s Manual NETIO-230A
www.koukaam.se
5
2 INTERFACE DESCRIPTION
2.1 Front View
1. Four LED indicators for actual status of each outlet. If the output is ON the LED
indicator shines.
2. RS-232C – Serial Port. Using the serial interface you can observe system logs or use
Telnet for full device control.
3. AUX – extension device interface.
4. Two buttons for output manual control. (see chapter 5.4 for details)
5. RJ-45 connector – network interface for connection to Ethernet / Internet.
2.2 Back View
1. Power socket for connection of the device to power outlet.
2. Fuse (see chapter 5.5.2 for details)
3. Device ON/OFF switch
4. OUT1 – OUT4 – Four switched power outputs