User`s manual

User’s Manual NETIO-230A
www.koukaam.se
8
5 OPERATION AND SETTINGS
5.1 Output control and settings
5.1.1 Output control
Click on Manual Control in the Menu on the left side. Output Manual control page will show up.
NETIO-230A can control even all four outputs at the same time. Choose which ports should be turned
ON/OFF and click Apply. If you would like only to restart the devices connected to the specific
outputs, check Interrupt and then click Apply. Selected outputs will interrupt for the time specified in
the Output configuration page. Please note that you can interrupt only outputs which are turned ON. If
you would like to control the specific output manually, make sure that the corresponding Manual
checkbox is checked. If not, the device does not accept manual output control requests and only
scheduled switching and the Watchdog feature are in operation. Pressing All Off button will turn all
outputs OFF.