Specifications
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
64 - User's Manual
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by
connecting to a PTZ driver or scanner via RS485 interface�
RS485 Settings
Disable: Select this option to disable this function�
PTZ camera: Select this option to enable PTZ operation�
To utilize this feature, please connect the Network Camera to a PTZ driver or scanner via RS485
interface rst. Then you can congure the PTZ driver and RS485 port with the following settings.
VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00, and Pelco D protocol.
If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera
(scanner)� Please refer to the user’s manual of your PTZ scanner to determine the Camera ID, PTZ
driver, and Port settings� The Camera ID is necessary to control multiple cameras� If you click Save to
enable this function, the camera control panel will be displayed on the main page� Please refer to the
illustration on page 66�