Quick Installation Guide

10
Lens flush
w/ edge of
enclosure
8.
Adjust the camera's position so that the lens module can ush align with the tempered
glass. Secure the camera using the screws and washers to the bottom of the housing.
9.
Connect 24V power source to the power input terminal. Connect power wires from the
DC 12V output to the camera. Connect the 24V power output to drive the external IRs.
AC/DC IN
(+ - )
AC/DC OUT
passthrough
(+ - )
DC 12V OUT
(+ - )
DC 24V OUT
(+ - )
Camera thermal
sensor
Camera heater
15W
Camera heater 30W
Window
heater
Fan
AC 24V
DC 24V