Quick Installation Guide

12
AWG20
AWG26
Purple
Blue
Orange
Brown
Green
Yellow
(O) D/N+:
(O) D/N-:
(O) COM+:
(O) COM-:
(I) LED+:
(I) LED-:
+
DO+(5V) DO2- DI2+ DI1+ DI- RS485- RS485+ Tout
DC12V
-
AC/DC+ PW
AC/DC- PW
Camera
terminal block
AC24V
AWG20
AC24V
A sample connection diagram consisting of CaMate's IR illuminators and the camera is
shown below. Please refer to your camera's documentation if your camera comes with
different pinouts.
(I) LED-
(O) D/N-
13.
You can connect the ground wires together and connect them to the DI- ground pin
on the terminal. Use a small at blade screwdriver to press the lever on the terminal block.
The default for the DI status is listed below:
DI Normal: High
Current Status:
> High - Day mode.
> Low - Night mode (IR is on)