Manual

VIVOTEK
User's Manual - 167
URL Command Document for All Series391
31
s<0~(m-1)>_h264_
profile
0~2
1
1/4
Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpe
g_prioritypolicy
framerate,
imagequality
framerate
4/4
The policy to apply when the
target bit rate is not sufficient
to satisfy current encoded
conditions.
“framerate” indicates frame
rate first.
“imagequality” indicates
image quality first.
s<0~(m-1)>_mjpe
g_ratecontrolmod
e
cbr, vbr
vbr
4/4
cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_mjpeg
_quant
1~5, 99, 100
3
4/4
Quality of JPEG video.
1 = worst quality, 5 = best
quality.
100: Use the quality level in
"qpercent"
99: Use the quality level in
"qvalue"
s<0~(m-1)>_mjpeg
_maxframe
1~7
7
1/4
Set maximum frame rate in fps
(for JPEG).
s<0~(m-1)>_mjpeg
_qvalue
10~200
49
4/4
Manual video quality level
input.
(s<0~(m-1)>_mjpeg_quant = 0)
s<0~(m-1)>_mjpeg
_qpercent
1~100
50
4/4
Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpe
g_bitrate
1000~40000000
16000000
4/4
Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_forcei
N/A
N/A
7/6
Force I frame.
URL Command Document for All Series391
32
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for
each channel which might be for different scene of light (daytime or nighttime).
Group: videoin_ c<0~(n-1)>_profile_i<0~(m-1)>
NAME VAL U E DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable/disable this profile
setting
policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
begintime hh:mm 18:00 4/4 Begin time of schedule mode.
endtime hh:mm 06:00 4/4 End time of schedule mode.
exposurelevel 0~12 6 4/4 Exposure level
minexposure 5~32000 32000 4/4 Minimum exposure time.
maxexposure 5~32000 30 4/4 Maximum exposure time.
maxgain 0~100 100 4/4 Manual set maximum gain
value.
mingain 0~100 0 4/4 Manual set minimum gain
value.
wdrc_mode 0~1 0 4/4 WDR enhanced.
0: off
1: auto
wdrc_strength 0~2 1 4/4 WDR enhanced.
0: low
1: medium
2: high
whitebalance auto,
manual,
rbgain
auto 4/4 “auto” indicates auto white
balance.
“manual” indicates keep
current value.
“rbgain” indicates using rgain
and gbain.
rgain 0~100 16 4/4 Manual set rgain value of
gain control setting.