User Manual

VIVOTEK
User's Manual - 109
do_i<0~(ndo-1)>
<boolean>
1/7
0 => Inactive, normal
1 => Active, triggered
(capability.ndo > 0)
onlinenum_rtsp
integer
6/7
Current number of RTSP connections.
onlinenum_httppush
integer
6/7
Current number of HTTP push server
connections.
eth_i0
<string>
1/7
Get network information from mii-tool.
vi_i<0~(nvi-1)>
<boolean>
1/7
Virtual input
0 => Inactive
1 => Active
(capability.nvi > 0)
Digital input behavior define
Group: di_i<0~(ndi-1)> (capability.ndi > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
normalstate
high,
low
1/1
Indicates open circuit or closed circuit
(inactive status)
Digital output behavior define
Group: do_i<0~(ndo-1)> (capability.ndo > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
normalstate
open,
grounded
1/1
Indicate open circuit or closed circuit
(inactive status)
Security
Group: security
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
privilege_do
view, operator,
admin
6/6
Indicate which privileges and above can
control digital output
(capability.ndo > 0)
privilege_camctrl
view, operator,
6/6
Indicate which privileges and above can
admin control PTZ
(capability.ptzenabled > 0 or capability.eptz
> 0)
user_i0_name string[64] 6/7 User name of root
user_i<1~20>_name string[64] 6/7 User name
user_i0_pass password[64] 6/6 Root password
user_i<1~20>_pass password[64] 7/6 User password
user_i0_privilege viewer,
operator,
admin
6/7 Root privilege
user_i<1~20>_
privilege
viewer,
operator,
admin
6/6 User privilege
Network
Group: network
NAME VALUE SECURITY
(get/set)
DESCRIPTION
preproces
s
<positive
integer>
7/6 An 32-bit integer, each bit can be set separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming service;
To stop service before changing its port settings. It’s
recommended
to set this parameter when change a service
port to the port occupied by another service currently.
Otherwise, the service may fail.
Stopped service will auto-start after changing port settings.
Ex:
Change HTTP port from 80 to 5556, and change RTP port
for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
‛/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5556&
network_rtp_videoport=20480‛
type lan,
pppoe
6/6 Network connection type.