User Manual

VIVOTEK
120 - User's Manual
*Note: Th
is is reserved for campatibility, and
we recommend changing to use
‚sharpnesspercent‛.
brightnesspercent 0 ~ 100 4/4 Adjust brightness of image by percentage.
Darker 0 <-> 100 Brighter
saturationpercent 0 ~ 100 4/4 Adjust saturation of image by percentage.
Less 0 <-> 100 More saturation
contrastpercent 0 ~ 100 4/4 Adjust contrast of image by percentage.
Less 0 <-> 100 More contrast
sharpnesspercent 0~100 4/4 Adjust sharpness of image by percentage.
Softer 0 <-> 100 Sharper
xoffset -4 ~ 4 4/4 Change start point of input image in horizontal.
yoffset -4 ~ 4 4/4 Change start point of input image in vertical.
deinterlace_enable <boolean> 4/4 Enable de-interlace
deinterlace_mode adaptive,
blend
4/4 Adaptive: Detect moving area and perform
de-interlace on i
t. This mode leads to better
image quality, but consumes more resource.
Blend: Use blend method to perform
de-interlace.
IBPE_edgeenable <boolean> 4/4 Enable edge enhancement.
IBPE_edgestrength 1 ~ 128 4/4 Adjust edge enhancement strength. 1 is
minimum and 128 is maximum.
IBPE_nrenable <boolean> 4/4 Enable noise reduction.
IBPE_nrmode 1 ~ 3 4/4 Adjust noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
IBPE_nrstrength 1 ~ 63 4/4 Adjust noise reduction strength. 1 is minimum
and 63 is maximum.
*Note: Saving value between -5~+5 to ‚brightness‛ will save its corresponding value to
‚brightnesspercent‛ automatically, and then the value of
‚brightness‛ will be set back to 100 to take
effect..
Saving value to ‚saturation‛, ‚contrast‛, or ‚sharpness‛ has the same behavior.
Audio input per channel
Group: audioin_c<0~(n-1)> for n channel products (capability.audioin>0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION