User Manual

VIVOTEK
User's Manual - 123
duration
10 ~ 600
4/4
If tampering value exceeds the ‘threshold’ for more than
‘duration’ second(s), then tamper detection is triggered.
DDNS
Group: ddns (capability.ddns > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Enable or disable the dynamic DNS.
provider
Safe100,
DyndnsDynamic,
DyndnsCustom,
TZO,
DHS,
DynInterfree,
CustomSafe100
6/6
Safe100 => safe100.net
DyndnsDynamic => dyndns.org (dynamic)
DyndnsCustom => dyndns.org (custom)
TZO => tzo.com
DHS => dhs.org
DynInterfree =>dyn-interfree.it
CustomSafe100 =>
Custom server using safe100 method
<provider>_h
ostname
string[128]
6/6
Your DDNS hostname.
<provider>_us
ernameemail
string[64]
6/6
Your user name or email to login to the DDNS
service provider
<provider>_pa
sswordkey
string[64]
6/6
Your password or key to login to the DDNS
service provider.
<provider>_se
rvername
string[128]
6/6
The server name for safe100.
(This field only exists if the provider is
customsafe100)
UPnP presentation
Group: upnppresentation
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Enable or disable the UPnP presentation
service.
UPnP port forwarding
Group: upnpportforwarding
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPnP port forwarding
service.
upnpnatstatus 0~3 6/7 The status of UPnP port forwarding, used
internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 =
no need for port forwarding
Express link
Group:expresslink
NAME VALUE SECURITY
(get/set)
DESCRIPTION
state onlycheck,
onlyoffline,
checkonline,
badnetwork
6/6
‚onlycheck‛ : You have to input the host name
of your camera and press "Register" button to
register it.
‚onlyoffline‛ : Express link is active, you can now
connect to this camera at expresslink_url.
‚checkonline‛ : Express link is not active.
‚badnetwork‛ : Express Link is not supported
under this network environment.
url string[64] 6/6
The URL to connect to this camera by express
link.
System log
Group: syslog
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 6/6 Enable remote log.
serverip <IP address> 6/6 Log server IP address.
serverport 514,
1025~65535
6/6 Server port used for log.