User Manual

VIVOTEK
User's Manual - 131
Bit 0 => Support pan.
Bit 1 => Support pan in UI.
Bit 2 => External or built-in pan
function; 0(built-in), 1(external).
lens_tilt
0, <positive
integer>
0/7
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => Support tilt.
Bit 1 => Support tilt in UI.
Bit 2 => External or built-in tilt function;
0(built-in), 1(external).
lens_zoom
0, <positive
integer>
0/7
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => Support zoom
Bit 1 => Support zoom in UI
Bit 2 => External or built-in zoom
function; 0(built-in), 1(external).
lens_focus
0, <positive
integer>
0/7
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => Support focus.
Bit 1 => Support focus in UI.
Bit 2 => External or built-in focus
function; 0(built-in), 1(external).
Bit 3 => Support auto focus in UI.
lens_iris
0, <positive
integer>
0/7
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => Support iris.
Bit 1 => Support iris in UI.
Bit 2 => External or build-in iris
function; 0(build-in), 1(external).
Bit 3 => Support auto iris in UI.
npreset
0, <positive
integer>
0/7
Number of preset locations.
protocol_https
< boolean >
0/7
Indicate whether to support HTTP over
SSL.
protocol_rtsp
< boolean >
0/7
Indicate whether to support RTSP.
protocol_sip
<boolean>
0/7
Indicate whether to support SIP.
protocol_maxconnection
<positive
integer>
0/7
The maximum allowed simultaneous
connections.
protocol_maxgenconnection
<positive
0/7
The maximum general streaming
integer> connections .
protocol_maxmegaconnection <positive
integer>
0/7 The maximum megapixel streaming
connections.
protocol_rtp_multicast_
scalable
<boolean> 0/7 Indicate whether to support scalable
multicast.
protocol_rtp_multicast_
backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7
Indicate whether to support RTP over
TCP.
protocol_rtp_http <boolean> 0/7
Indicate whether to support RTP over
HTTP.
protocol_spush_mjpeg <boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
protocol_pppoe <boolean> 0/7 Indicate whether to support PPPoE.
protocol_ieee8021x <boolean> 0/7 Indicate whether to support
IEEE802.1x.
protocol_qos_cos <boolean> 0/7 Indicate whether to support CoS.
protocol_qos_dscp <boolean> 0/7 Indicate whether to support
QoS/DSCP.
protocol_ddns <boolean> 0/7 Indicate whether to support DDNS.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of
available
resolution
separated by
commas>
0/7 Available resolutions list.
videoin_maxframerate <a list of
available
maximum
frame rate
separated by
commas>
0/7 Available maximum frame list.
videoin_codec
mpeg4.
mjpeg, h264
0/7 Available codec list.