User Manual

VIVOTEK
134 - User's Manual
Event setting
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
‚0‛ = low priority
‚1‛ = normal priority
‚2‛ = high priority
delay 1~999 6/6
Delay in seconds before detecting the next event.
trigger boot,
di,
motion,
seq,
tampering,
visignal,
virestore,
vi
6/6 Indicate the trigger condition:
‚boot‛ = System boot
‚di‛= Digital input
‚motion‛ = Video motion detection
‚seq‛ = Periodic condition
‚tampering‛ = Tamper detection.
‚visignal‛ = Video input signal loss.
‚virestore‛ = Video input signal restore
‚vi‛= Virtual input (Manual trigger)
triggerstatus <string> 6/6 The status for event trigger
di <integer> 6/6 Indicate the source id of di trigger.
This field is required when trigger condition is ‚di‛.
One bit represents one digital input. The LSB
indicates DI 0.
vi <integer> 6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is ‚vi‛.
One bit represents one digital input. The LSB
indicates VI 0.
tampering 0 ~ 255 6/6
Indicate the source of the tampering detection.
Each bit represents one channel, and the LSB
indicates channel 1.
visignal 0 ~ 255 6/6 Indicate the source of video input signal loss.
Each
bit represents one channel, and the LSB indicates
channel 1.