User Manual

VIVOTEK
User's Manual - 135
Event setting
Group: event_i<0~2>
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
name
string[40]
6/6
Identification of this entry.
enable
0, 1
6/6
Enable or disable this event.
priority
0, 1, 2
6/6
Indicate the priority of this event:
‚0‛ = low priority
‚1‛ = normal priority
‚2‛ = high priority
delay
1~999
6/6
Delay in seconds before detecting the next event.
trigger
boot,
di,
motion,
seq,
tampering,
visignal,
virestore,
vi
6/6
Indicate the trigger condition:
‚boot‛ = System boot
‚di‛= Digital input
‚motion‛ = Video motion detection
‚seq‛ = Periodic condition
‚tampering‛ = Tamper detection.
‚visignal‛ = Video input signal loss.
‚virestore‛ = Video input signal restore
‚vi‛= Virtual input (Manual trigger)
triggerstatus
<string>
6/6
The status for event trigger
di
<integer>
6/6
Indicate the source id of di trigger.
This field is required when trigger condition is ‚di‛.
One bit represents one digital input. The LSB
indicates DI 0.
vi
<integer>
6/6
Indicate the source id of vi trigger.
This field is required when trigger condition is ‚vi‛.
One bit represents one digital input. The LSB
indicates VI 0.
tampering
0 ~ 255
6/6
Indicate the source of the tampering detection.
Each bit represents one channel, and the LSB
indicates channel 1.
visignal
0 ~ 255
6/6
Indicate the source of video input signal loss. Each
bit represents one channel, and the LSB indicates
channel 1.
virestore 0 ~ 255 6/6 Indicate the source of video input signal restore.
Each bit represents one channel, and the LSB
indicates channel 1.
mdwin <integer> 6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is
‚md‛.
One bit represents one window.
The LSB indicates the 1
st
window.
For example, to detect the 1
st
and 3
rd
windows,
set mdwin as 5.
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is ‚seq‛.
weekday 0~127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
begintime hh:mm 6/6 Begin time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
action_do_i<0~(ndo-1
)>_enable
0, 1 6/6 Enable or disable trigger digital output.
action_do_i<0~(ndo-1
)>_duration
1~999 6/6 Duration of the digital output trigger in seconds.
action_do_i<0~(ndo-1
)>_delay
0~999 6/6 The delay time needed before trigger
ing the digital
output (in seconds)
action_goto_c<0~(nvid
eoin-1)>_enable
<boolean> 6/6
Indicate whether recalling the preset position is
enabled.
0: Disabled
1: Enabled
action_goto_c<0~(nvid
eoin-1)>_name
string[40] 6/6 The preset position name used for recalling.