User Manual

VIVOTEK
User's Manual - 147
patrol
Auto patrol.
stop
Stop camera.
zoom
wide
Zoom larger view with current speed.
tele
Zoom further with current speed.
stop
Stop zoom.
zooming
wide or tele
Zoom without stopping for larger view or further view with
zs speed, used for joystick control.
zs
0 ~ 6
0 ~ 15 <SD81X1>
Set the speed of zooming, ‚0‛ means stop.
vx
<integer , excluding
0>
The slope of movement = vy/vx, used for joystick control.
vy
<integer>
vs
0 ~ 7
0 ~ 15 <SD81X1>
Set the speed of movement, ‚0‛ means stop.
x
<integer>
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y
<integer>
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize
<window size>
The size of plug-in (ActiveX) window in web page
resolution
<window size>
The resolution of streaming.
stretch
<boolean>
0 indicates that it uses resolution (streaming size) as
the range of the coordinate system.
1 indicates that it uses videosize (plug-in size) as the
range of the coordinate system.
focus
auto
Auto focus.
far
Focus on further distance.
near
Focus on closer distance.
iris
auto
Let the Network Camera control iris size.
open
Manually control the iris for bigger size.
close
Manually control the iris for smaller size.
speedlink
0 ~ 4
Issue speed link command.
gaptime
0~32768
The gaptime between two consecutive ptz commands for
device. (unit: ms)
return <return page> Redirect to the page <return page>
after the parameter
is assigned . The <return page>
can be a full URL path
or relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.
Recall (capability.ptzenabled)
Note: This request requires Viewer privileges.
Method: GET
Syntax:
http://<
servername >/cgi-bin/viewer/recall.cgi?
recall=<value>[&channel=<value>][&return= <return page> ]
PARAMETER VALUE DESCRIPTION
recall
Text string less than
30 characters
One of the present positions to recall.
channel <0~(n-1)> Channel of the video source.
return <return page> Redirect to the page <return page>
after the parameter
is assigned . The <return page> ca
n be a full URL path
or relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.
Preset Locations (capability.ptzenabled)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return= <return page> ]
PARAMETER VALUE DESCRIPTION