User Manual

VIVOTEK
User's Manual - 149
addpos
<Text string less than
30 characters>
Add one preset location to the preset list.
channel
<0~(n-1)>
Channel of the video source.
delpos
<Text string less than
30 characters>
Delete preset location from preset list.
return
<return page>
Redirect to the page <return page> after the parameter
is assigned . The <return page> can be a full URL path
or relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.
IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://< servername >/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start= <ipaddress> &end= <ipaddress> ][&index=< value >]
[&return=<return page>]
PARAMETER
VALUE
DESCRIPTION
method
addallow
Add allowed IP address range to the server. Start and
end parameters must be specified. If the index parameter
is specified, it will try to add starting from the index position.
adddeny
Add denied IP address range to the server. Start and
end parameters must be specified. If the index parameter
is specified, it will try to add starting from the index position.
deleteallow
Remove allowed IP address range from server. If start
and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try
to remove the address from given index position. [start,
end] parameters have higher priority then the [index]
parameter.
deletedeny
Remove denied IP address range from server. If start
and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try
to remove the address from given ind
ex position. [start,
end] parameters have higher priority then the [index]
parameter.
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page>
after the parameter
is assigned . The <return page>
can be a full URL path
or relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.
IP Filtering for ONVIF
Syntax: <product dependent>
http://< servername >/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip= <ipaddress> [&inde
x=<value>][&return=< return page >]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return
=< return page >]
PARAMETER VALUE DESCRIPTION
type NULL Get IP filter type
allow, deny Set IP filter type
method addv4 Add IPv4 address into access list.
addv6 Add IPv6 address into access list.
delv4 Delete IPv4 address from access list.
delv6 Delete IPv6 address from access list.
ip <IP address> Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page>
after the parameter
is assigned . The <return page>
can be a full URL path
or relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.