User Manual

VIVOTEK
56 - User's Manual
■ Enable deinterlace: Check to enable deinterlace, and choose Adaptive mode or Blend mode in the
drop-down list� Adaptive mode provides the best image quality, while Blend mode provides better
image quality (than deinterlace function is off)� Noted that applying this function to all channels at the
same time will consume quite a lot computing power�
■ Enable edge enhancement: Check to enable edge enhancement, and drag the slider bar to adjust the
strength� Noted that applying this function to all channels at the same time will consume quite a lot
computing power�
■ Enable noise reduction: Check to enable noise reduction, and you can also choose to reduce
Gaussian noise, impulse noise, or Gaussian and impulse noise in the drop-down list� Drag the
slider bar to adjust the strength� Noted that applying this function to all channels at the same time will
consume quite a lot computing power�
■ Restore: Click to restore the default setting.
■ Save: When finishing the setting, you can choose to apply the settings to Current channel, All
channels, Current channel and channel 2, etc� in the drop-down list� Then click Save to enable the
settings�
Privacy Mask
Advanced Mode
Click Privacy Mask to open the settings page. On this page, you can block out sensitive zones to
address privacy concerns� Please choose the Channel rst.