User Manual
VIVOTEK
8 - User's Manual
Network Deployment
Setting up the Video Server over the Internet
This section explains how to congure the video server to an Internet connection�
1� Make video connection from the camera to the BNC video input�
2� Make audio connection from the Line-Out audio source to the RCA audio input�
3� Connect the Video Server to a switch via Ethernet cable�
4� Connect the power cable from the Video Server to a power outlet�
5� If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block. For detailed pin denition, please refer to the next page.
There are several ways to set up the video server over the Internet� The rst way is to set up
the video server behind a router� The second way is to utilize a static IP� The third way is to use
PPPoE�
OUT
CAMERA NO.
MIC
POWER
INVIDEO OUT
1 2 3
OFF ON
2
1
POWER
COLLISION
LINK
RECEIV E
PARTITION
1
2
3
4
5
3
4
5
Ethernet Switch
Analog Camera