User Manual
Table Of Contents
- Revision History
- Overview
- Accessing the Video Server
- Main Page
- Client settings
- Configuration
- System
- Security
- HTTPS (Hypertext Transfer Protocol over SSL) 
- SNMP (Simple Network Management Protocol) 
- Network
- Express link
- DDNS
- Access list 
- Digital I/O
- Audio and video
- Motion detection
- Camera tampering detection
- Camera control
- Homepage layout 
- Application 
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- System log 
- View parameters 
- Maintenance
- Appendix
VIVOTEK
24 - User's Manual
Joystick settings
Calibrate: Make sure a joystick is already attached to your COM port or USB port on your client
computer. Click on the Calibrate button and the Windows Game Controller function will be started.
If properly connected, your operating system should have already detected the joystick. Follow the
onscreen instructions to calibrate your joystick.
Configure buttons: You can define individual joystick buttons using this function. Click to open a
configuration window and assign functions to joystick buttons using the following steps: 1. Select a
button uing the pull-down menu. 2. Select an Action to be toggled by the button. 3. Click on the Assign
button, and then repeat the process to dene other buttons.
1
2
3