User Manual
Table Of Contents
- Revision History
- Overview
- Accessing the Video Server
- Main Page
- Client settings
- Configuration
- System
- Security
- HTTPS (Hypertext Transfer Protocol over SSL) 
- SNMP (Simple Network Management Protocol) 
- Network
- Express link
- DDNS
- Access list 
- Digital I/O
- Audio and video
- Motion detection
- Camera tampering detection
- Camera control
- Homepage layout 
- Application 
- Recording > Recording settings 
- Local storage > SD card management
- Local storage > Content management
- System log 
- View parameters 
- Maintenance
- Appendix
VIVOTEK
User's Manual - 37
► If the default ports are already used by other devices connected to the same router, the video server
will select other ports for the video server.
► If UPnP
TM
is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
► Steps to enable the UPnP
TM
user interface on your computer:
Note that you must log on to the computer as a system administrator to install the UPnP
TM
components.
1. Go to Start, click Control Panel, then click Add or Remove Programs.
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components.
3.
In the Windows Components Wizard dialog box, select
Networking Services and click Details.
NOTE: