User`s guide

VIXEL INSPEED™ SAN STORAGE SWITCH MODEL 375 APPENDIX A SPECIFICATIONS
USER’S GUIDE
EMBEDDED IN THE FUTURE OF STORAGE 62
APPENDIX A Specifications
SWITCH SPECIFICATIONS
O
PERATING CONDITIONS
The switch must be operated in a clean, dry environment with unrestricted airflow. Air flows in
through the cosmetic end and out through the business end (sometimes called the transceiver
end or “back-of-box”).
To avoid overheating, maintain a minimum clearance of two inches (50.8 millimeters) on each end
of the switch (the cosmetic end and the business end). Allow an adequate amount of space on the
top and sides of the switch for proper air ventilation. Do not place the switch on heat-generating
surfaces. Operating conditions are listed below.
Number of Ports 20
Operating Rate All ports operate at 1.0625 or 2.125 Gbps (selectable)
Port Media Type SFP
Enclosure 1U full-rack form-factor
Management Interface RS-232 or 10/100 Ethernet
Operating Mode Switching or Non-switching modes
Configurability Management interface configurable
Power On Selftest (POST) Yes
Dimensions 17.20" x 1.57" x 17.50" (W x H x D)
AC Power Input 50 or 60 Hz / 100 – 250 VAC / 1.0 – 0.5 A
AC Power Connector IEC connector
Weight Approximately 18 lbs.
Requirement Value
Operating Temperature 0°C to 40°C normal operation (ambient air temperature)
Storage -40°C to 80°C non-condensing
Power 50 or 60 Hz / 100 – 250 VAC / 1.0 – 0.5 A