User Manual

PREPARATION
Polarie works with 2 AA alkaline batteries which are sold separately. An external power supply is available for the Polarie using the USB-minib
plug (DC4.4V to 5.25V)*.
*Sanyo Lithium Ion batteries with USB output (Eneloop KBC-L2B) is approved for use with Polarie as of Nov. 2011.
Inserting the Batteries
Open the battery compartment
cover by pushing down on the
tab of the cover as shown.
Batteries for the Polarie
Push down on the tabPush down on the tab
Pull the cover to openPull the cover to open
N-S change
switch
N-S change
switch
1
Insert two AA alkaline batteries
in the correct direction.
2
Utilizing an External Power Supply
Use an external power supply
with USB-minib plug (DC4.4V
to 5.25V) for this purpose.
If you connect the external power supply with the batteries
inserted, the external power supply takes precedence over the
batteries.
Connecting the external power supply prevents the battery
compartment cover from opening. Finish setting the S-N switch in
the battery compartment before you connect the external power
supply.
Connect to the USB-minib plug
socket as shown in the photo.
1 2
Confirm the N-S change switch
inside the battery compartment
is set to work correctly in your
location. Switch to N in the
northern hemisphere or switch
to S in the southern hemisphere.
3
Replace the battery compartment
cover so that the tab on the
cover fits in place.
4
Note:
USB-minib plug socket USB-minib cableUSB-minib plug socket USB-minib cable
10