SmartGPU2-LCD480X320Touch-CommandSet

SMART GPU 2 3.5” TOUCH
Command Set
Vizic Technologies ©2014 125
Briefly Summary of Commands in this section:
*All of Those next commands always begin with the byte ‘E’-45hex, as
they are EEPROM-FLASH commands, followed by the next
parameters/bytes.
• Init/Clear EEPROM Buffer – 49hex ‘I’
• Read Bytes from EEPROM Buffer – 52hex ‘R’
• Write Bytes to EEPROM Buffer – 57hex ‘W’
• Fill Buffer with EEPROM Page# – 46hex ‘F’
• Save Buffer to EEPROM Page# – 53hex ‘S’
• Erase EEPROM Page# – 45hex ‘E’
• Compare Buffer to EEPROM Page# – 43hex ‘C’
*EEPROM-FLASH Erase-Write Endurance is 10 000 Cycles.
*EEPROM-FLASH Minimum Data Retention is >15 years.