USER MANUAL Model: D24hn-G9
Safety & Certification THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO TV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV.
constitute a risk of electric shock to persons. • • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. To reduce risk of electric shock, do not touch the connector with wet hands. • • The wall socket should be installed near your TV and easily accessible. • Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock. Insert batteries in accordance with instructions.
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and TruSurround are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. c DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
Table Of Contents Getting to Know Your TV .............................................7 Setting the Timer .............................................................................23 Using the Info Window .......................................................................33 Front Panel ..........................................................................................7 Setting the Auto Power Off Feature ...............................................23 Playing USB Media .................
Getting to Know Your TV 1 FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off.
1 Rear Panel HDMI - Connect an HDMI device. Component/Composite - Connect a component or composite. Video/ L/R Y/Pb/Pr Coaxial - Connect to a coaxial cable from cable, satellite, or antenna. Stereo Audio Out - Connect 3.5mm audio device, such as a headset or sound bar. USB - Connect a USB thumb drive to play photo. Optical Audio Out - Connect to an optical/SPDIF audio device, such as home audio receiver. Power - Press to turn on the TV. Press and hold to turn the TV off.
Connecting Your Devices 1 CONNECTING A DEVICE - AUDIO & VIDEO CABLE TYPES Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). 2. Connect the appropriate cable (not included) to the TV and the device. 3. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).
1 CONNECTING A DEVICE D24hn-G9 includes a Component In/ AV In port that requires additional adapters (not included). 1. Connect the appropriate cable (not included) to the TV and the device using an adapter (not included). 2. Turn the TV and your device on. Set the TV’s input to match the connection you used (Component or Composite).
1 CONNECTING A DEVICE - AUDIO CABLE TYPES Your TV can be output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has audio port that matches an available port on the TV (Optical, RCA, etc). 2. Connect the appropriate cable (not included) to the TV and the device. 3. Turn the TV and your device on. HDMI CABLE HDMI Note: The actual ports and their locations may vary, depending on the TV model.
1 WALL-MOUNTING THE TV To mount your TV on a wall, you will need a wall mount. Consult the information on this page to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface.
1 Replacing the Batteries USING THE REMOTE 1. Find the notch on the back of the remote. Insert a coin and pry open the back cover. 2 1 INPUT 3 4 MENU EXIT 1. Input - Change the currently displayed input 2. Power - Turn Television on or off 5 3. Exit - Close the on-screen menu OK 4. Menu - Display the settings menu 6 5. Arrow - Navigate the on-screen menus 6. OK / Enter - Select the highlighted option / Confirm channel or passcode entered using the number pad.
Completing The First-Time Setup 2 The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use: Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. TV SIGNAL SELECT A LANGUAGE Select how you watch TV. Choose your mode. Select Store demo for in-store display. Select Home Use for in-home use.
Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the Menu button on the remote. From this menu, you can: • Adjust the Picture settings TV Settings Picture • Adjust the Audio settings • Set up the Timers • Adjust the Channel settings Channels • Set up Closed Captioning Closed Captions • Name and adjust Inputs • Adjust TV settings Audio 3 CHANGING THE INPUT SOURCE NAVIGATING THE ON-SCREEN MENU To open the on-screen menu: 1.
3 CHANGING THE SCREEN ASPECT RATIO Normal The TV can display images in four different modes: Normal, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Stretch Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include wide-screen movies and older television programs. Wide To change the screen aspect ratio: Zoom 1. Press the Wide button on the remote. 2.
3 ADJUSTING THE PICTURE SETTINGS Your TV can be adjusted to suit your preferences and viewing conditions. If you save changes to the settings for a picture mode, an asterisk appears after its name (see Saving a Custom Picture Mode). To adjust the picture settings: 1. Press the Menu button on the remote. The on-screen menu is displayed. 4.
3 Adjusting the Color Temperature Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Adjusting the color temperature changes the white balance of the picture. Picture Mode Edit Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
3 Locking/Unlocking a Custom Picture Mode Deleting a Custom Picture Mode Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To lock all custom picture modes: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK.
3 Adjusting the Color Tuner Settings To turn color channels off and on: The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns. The Color Tuner, 11 Point White Balance, and test patterns allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter. To adjust the HSB color settings: 1.
3 To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until the RAMP TEST PATTERN menu is displayed. Ramp Test Pattern Off 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to select the color for the ramp test pattern. Selecting a color immediately shows that color ramp.
3 ADJUSTING THE AUDIO SETTINGS • To adjust the audio settings: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The Audio menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow buttons to change the setting: • Speakers - Turns the built-in speakers On or Off. • DTS TruSurround - Toggle between On or Off to hide or display the Equalizer slider.
3 SETTING TIMERS Setting the Auto Power Off Feature Setting the Timer To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. When activated, the TV’s timer will turn the TV off after a set period of time. 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Timers and press OK. The TIMERS menu is displayed. 3.
3 SETTING UP CHANNELS You can use the TV’s Channels menu to: • Find Channels • Select channels to skip • Select Analog Audio mode • Select the language for Digital Audio Channels Channel Source Back Antenna Scanning for Channels Skipping Channels The TV may need to scan for channels before it can display programs and their associated information.
3 LISTENING TO ALTERNATE AUDIO To use the Digital Language feature: Changing the Analog Audio Language Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP). Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming. 1.
3 USING PARENTAL CONTROLS The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. Other devices have their own parental control settings. Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating To manage program content according to its rating, you must enable the Program Rating feature.
3 SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. Digital closed captions can be displayed according to your preference. See the diagram on the next page for an explanation of the parts of the closed caption area.
3 Typical choices include: • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once. Text Background In the example, the closed caption text is green, the background is black, and the window is red.
3 RENAMING DEVICES ON THE INPUT MENU You can rename the inputs to make them easier to recognize on the Input menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source. Input Name To change the name of an input: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Input Settings and press OK. The INPUT SETTINGS menu is displayed. 3.
3 CHANGING THE TV SETTINGS Using the SYSTEM menu, you can: • View system information • Change the on-screen menu language • Set time zone and local settings Menu Language • Adjust the CEC settings Time & Local Settings • Adjust to preserve Aspect Ratio or fill the screen • Adjust accessibility settings • Reset the TV settings & setup administrative controls System Back System Information English Parental Controls View Mode Overlay Wide CEC Power Indicator Accessibility Reset & Admin On
3 Setting the Time and Local Settings Adjusting the CEC Settings Accessibility settings To ensure the correct time is displayed when you press the Info button, set the TV’s time zone: The CEC function on your TV enables you to control devices connected to HDMI (ARC) input with the included remote, without any programming. Using CEC, your VIZIO TV remote can control: VIZIO is committed to providing intuitive, user-friendly products.
3 USING THE RESET & ADMIN MENU You can use the TV’s RESET & ADMIN menu to restore the TV to its factory default settings as well as access other system settings. Using the RESET & ADMIN, you can: • Reset the TV to factory settings • Start or stop the Store Demo Mode Reset & Admin Reset to Factory Defaults Store Demo Back Restoring the TV to Factory Default Settings Setting a System PIN All of the on-screen menu settings can be reset to the factory defaults.
3 USING THE INFO WINDOW The Info Window can be displayed by pressing the Info button on the remote: • Press the Info button one time to display the current input, time and picture mode Current Input HDMI-1 Time 5:00 pm Picture Mode Wide INFO WINDOW 33
Playing USB Media The USB Media Player allows you to connect a USB thumb drive to your TV and play photos. 4 Displaying USB Media To display your USB media: 1. Connect your USB thumb drive to the USB port on the side of the TV. 2. The TV will recognize the USB stick. Use the Arrow Keys on the remote to select the content you’d like to play. You can display your photos in Fullscreen.
Troubleshooting & Technical Support A Do You Have Questions? Find Answers At SUPPORT.VIZIO.
A Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications.
A HELP TOPICS The remote is not responding. There is no sound. • Make sure the batteries are properly inserted matching the and + symbols. • Press Volume Up on the remote control. • Replace the batteries with fresh ones. • Press the MUTE button on the remote to ensure mute is off. • Check the audio settings. See Adjusting the Audio Settings. • Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV.
Specifications B D24hn-G9 Size Viewable Area 24” 23.5” MOUNTING Dimensions w/ Stand 21.83” x 14.78” x 6.18” (554.5 x 375.5 x 157.0mm) Dimensions w/o Stand 21.83” x 13.15” x 2.06” (554.5 x 334.1 x 52.4mm) Weight w/ Stand 6.17 lbs (2.80 kg) Weight w/o Stand 5.95 lbs (2.
Regulatory Information FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Limited Warranty UNITED STATES AND CANADA BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
D or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO.
Legal Information Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.
© 2018 VIZIO INC. ALL RIGHTS RESERVED.