VIZIO USER MANUAL Models D32-D1, D32h-D1, & D32x-D1
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information on the ENERGY STAR program, go to energystar.gov For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
Welcome THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel.
Continuous use in this case may result in fire or electric shock. • Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself. • Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
TELEVISION ANTENNA CONNECTION PROTECTION Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system. If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Table of Contents Installing the TV......................................................9 Deleting a Custom Picture Mode......................................... 36 Inspecting the Package Contents . . . . . . . . . . . . . . . . . . . . . . . 9 Adjusting the Audio Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 37 Installing the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Changing the Equalizer Settings..........................................
Troubleshooting & Technical Support.................69 Enabling or Disabling Program Ratings........................... 52 Locking and Unlocking Channels..................................... 52 Specifications........................................................72 Blocking and Unblocking Content by Rating................... 53 Limited Warranty..................................................74 Changing the Parental Control Passcode........................ 53 Resetting the Content Locks............
1 Installing the TV INSPECTING THE PACKAGE CONTENTS Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged.
1 INSTALLING THE TV To install the stands: After removing the TV from the box and inspecting the package contents, you can begin installing the TV. Your TV can be installed in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Installing the TV Stands Your TV includes stands designed to support the weight of the TV and keep it from falling over.
1 Insert the left and right stands into the base of the TV. (The stands are identical.) Secure each stand to the TV with two (2) Phillips screws (included). Insert the screws into the back of the TV and tighten them using a Phillips screwdriver. When you are finished, place the TV on a stable, level surface.
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. D32-D1 D32h-D1 D32x-D1 M4 M4 M4 Screw Size: Hole Pattern: 100 mm (V) x 100 mm (H) 100 mm (V) x 100 mm (H) 100 mm (V) x 100 mm (H) Weight w/o Stand: 11.31 lb (5.13 kg) 11.02 lb (5.00 kg) 11.31 lb (5.
1 REMOTE SENSOR & POWER INDICATOR When using the remote, point it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 56.
1 REAR PANEL USB - Connect a USB thumb drive to play photos, music, or video. HDMI - Connect an HDMI device. Optical Audio Out - Connect an optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect an RCA audio device, such as sound bar. DTV/TV (Coaxial) - Connect a coaxial cable from a cable or satellite box, or from an antenna. Component/Composite - Connect a component or composite device. Ethernet - Connect an Ethernet cable from a home network. HDMI - Connect an HDMI device.
1 APP LAUNCHER Quickly launch the pictured App. (Also turns on the TV if it is off.) INPUT POWER Turn TV on or off. Change the currently displayed input. A/V CONTROLS Control USB media player and video streaming playback. MENU Display the on-screen menu. CLOSED CAPTIONS Turn closed captions on and off. INFO EXIT Display the info window. Close the on-screen menu. ARROW Navigate the on-screen menu. OK Select the highlighted option. GUIDE BACK Go to the previous on-screen menu.
1 Replacing the Batteries 1. To remove the battery cover, press on the logo and slide the cover out. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
2 Connecting Your Devices CONNECTING A DEVICE Your TV can be used to display output from most devices. Cable/Satellite Box 1. Verify that your device has a video port that matches an available port on the TV (HDMI-1, HDMI-2, Comp, etc.). 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. Game Console DVD/Blu-ray Player 4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, Comp, etc.).
2 CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES AV CABLE COAXIAL CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your TV. Video signals are sent over the yellow connector while audio is sent over the red and white connectors. Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector.
2 COMPONENT CABLE HDMI CABLE Component cables are designed to carry HD (high definition) video signals along with additional audio connections. Colors are delivered with color information over three connectors for video (separated into red, blue and green signals) and the left and right audio connectors (red and white). HDMI is the intelligent, all-digital interface that delivers both dazzling quality and unmatched ease of use.
2 CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device, such as a receiver or sound bar. Home Audio Receiver 1. Verify that your device has an audio port that matches an available port on the TV (HDMI, Optical, or RCA). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE* BEST • ARC 2-WAY COMMUNICATION • 2.0-5.
2 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE RCA cables (or Composite cables) are the traditional way of connecting your devices to your audio device. Audio signals are sent over the red and white connectors. Optical/SPDIF cables transmit audio signals as pulses of light through a cable made of plastic fibers. Audio signals are digitally transmitted between devices.
2 CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC Built-in Tuner Built-in Tuner VIZIO Internet Apps Plus® VIZIO Internet Apps Plus® Your TV Your TV Without an HDMI ARC setup, your TV needs an extra cable to connect it to your home audio receiver. The audio signal is analog-only.
2 CONNECTING TO YOUR NETWORK Connecting to a Wireless Network Your TV is Internet-ready. It can be connected to your home network with a Wired or Wireless connection. 1. Ensure you have a router or modem broadcasting as high-speed wireless signal (802.11n recommended). Connecting to a Wired Network (Best) 2. Use the Guided Network Setup to configure the TV. See Using the Guided Setup Menu on page 58. 1. Connect an Ethernet cable to your router and to the Ethernet port on the back of the TV.
Completing the First-Time Setup 4. Use the Arrow buttons on the remote to highlight your country, and then press the OK button. The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. • Your devices should be connected. • If you have a wireless network, have the wireless password ready.
3 11. Use the Arrow and OK buttons on the remote to select the input your TV source is connected to. 8. Type your E-mail Address, First Name, Last Name, Phone Number, and ZIP Code using the on-screen keyboard. Highlight Next and press OK. 9. Use the Arrow buttons on the remote to highlight your TV source and press OK. The First-Time Setup is complete. If you have cable TV, select whether you have a cable box or if you connect the TV directly to a cable from the wall. 10.
4 Using the On-Screen Menu CHANGING THE INPUT SOURCE Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote.
4 CHANGING THE SCREEN ASPECT RATIO The TV can display images in five different modes: Normal, Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently. • Wide stretches a 4:3 aspect ratio picture to the edges of the screen. Since the picture is being stretched, the display image may appear distorted. If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image.
4 VIZIO Wide VIEWING VIDEO WITH THE MENU OPEN Zoom Normal Panoramic When the on-screen menu opens, it covers the left-hand portion of the picture. The picture can be displayed in three different ways: • • • Overlay - The picture stays in its normal position and the menu covers the left-hand portion of the picture. (The picture is full-sized.) Exit 2D VIZIO Brightness Contrast Color Tint ABC Sharpness Picture 3. Press the Up Arrow button on the remote to the menu.
4 ADJUSTING THE PICTURE SETTINGS a brighter, more vivid picture. Your TV display can be adjusted to suit your preferences and viewing conditions. • Game mode reduces throughput delays and optimizes the picture settings for displaying game console output. • Computer mode optimizes the picture settings for displaying computer output. To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2.
4 Adjusting the More Picture Settings • Game Low Latency - Reduces video delay (lag) when gaming. Select On or Off. This option is not available for devices connected using a coaxial cable. • Picture Size & Position - Opens a sub-menu with two options: To adjust the More Picture settings: 1. From the PICTURE menu, use the Arrow buttons on the remote to highlight More Picture and press OK. The MORE PICTURE menu is displayed. 2.
4 Adjusting the Color Temperature Adjusting the color temperature changes the white balance of the picture. Adjusting the Picture Mode Edit Settings To adjust the Picture Mode Edit settings: 1. From the PICTURE menu, use the Arrow buttons to highlight More Picture, and then press the OK button. The MORE PICTURE Wide Normal Panoramic menuZoom is displayed. To adjust the color temperature: 1. From the MORE Picture menu, use the Arrow buttons to highlight Color Temperature, then press OK. 2.
4 Adjusting the Color Calibration Settings Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the Hue, Saturation, and Brightness (HSB) color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns. Color Calibration Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings.
4 To turn color channels off and on: To adjust the 11 Point White Balance settings: 1. From the PICTURE menu, use the Arrow buttons to highlight Color Calibration and press the OK button. The COLOR CALIBRATION menu is displayed. 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 Point White Balance menu is displayed. 2. Use the Arrow buttons to highlight Color Tuner, and then press the OK button.
4 To show or hide the Color Bar Test Pattern: To show or hide the Flat Test Pattern: 1. Ensure that you are on an input that is displaying active content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the SMPTE Test Pattern menu is displayed. 1. Ensure that you are on an input that is displaying active content.
4 To show or hide the Ramp Test Pattern: Creating a Custom Picture Mode 1. Ensure that you are on an input that is displaying active content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Ramp Test Pattern menu is displayed. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
4 Locking and Unlocking the Custom Picture Modes Deleting a Custom Picture Mode Custom picture modes can be locked with a unique PIN to prevent accidental changes to their settings. Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To lock all custom picture modes: 1.
4 ADJUSTING THE AUDIO SETTINGS volume leveling off. Adjusting audio settings creates a custom audio mode which can be further modified or restored to factory defaults (deleted). • Balance - Adjusts the loudness of the audio output from the left and right speakers. • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track.
4 Changing the Equalizer Settings Delete the Custom Audio Mode To select a pre-set audio mode: To delete the custom audio mode: 1. Press the MENU button on the remote. The on-screen menu is displayed. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons to highlight Audio and press OK. The AUDIO menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3.
4 SETTING TIMERS Setting the Auto Power Off Feature This TV has timers that save energy, can turn off the TV when you go to sleep, and can blank the screen when you stream music. To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. Setting the Sleep Timer To set the Auto Power Off feature: When activated, the TV’s sleep timer will turn the TV off after a set period of time. 1.
4 Blanking the Screen You can blank the screen while there is audio streaming. This feature helps save energy and the life of the screen. To blank the screen: • From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Blank Screen, and then press OK. Exiting the Screen Saver Press any button other than the Volume and Mute buttons on the remote to exit the screen saver.
4 USING THE NETWORK CONNECTION MENU Changing the Manual Setup Settings Advanced users can fine-tune the network settings using the Manual Setup feature. Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. To change advanced network settings: Connecting to a Wireless Network 1. From the NETWORK menu, highlight Manual Setup and press OK. The MANUAL SETUP menu is displayed.
4 Finding MAC Addresses for Network Setup Connecting to a Hidden Network The security settings on your router may require you to enter the TV's MAC address in the router's settings. To connect to a wireless network whose network name (SSID) is not being broadcast: To find the TV's MAC address: 1. From the NETWORK menu, highlight Hidden Network and press OK. The ENTER ACCESS POINT NAME screen is displayed. 1. From the NETWORK menu, highlight Manual Setup and press OK.
4 SETTING UP CHANNELS Selecting a Channel Source 1. On the remote control, press Input and use the Arrow button to highlight TV (antenna icon), then press OK. You can use the TV’s Tuner menu to: • Select a channel source • Find channels • Perform a partial channel scan Channels not searched • Manually add channels Channel Source • Select channels to skip Find Channels • Select language for analog and digital channels.
4 Adding New Channels To add a single new analog channel: Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Search and Add Analog Channel options. 1. From the CHANNELS menu, highlight Add Analog Channel and press OK. The ADD ANALOG CHANNEL menu is displayed. To add a range of new channels: 2. Highlight Enter Channel and use the Number Pad on the remote to enter the number of the channel you are adding. 1.
4 Skipping Channels After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature. Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls.
4 Changing the Audio Language To use the Digital Language feature: Some free-to-air, cable, and satellite channels broadcast programs in more than one language. The Analog Audio and Digital Language features allow you to listen to audio from Secondary Audio Programming (SAP). SAP allows you to listen to broadcasts in multiple languages. • Analog Audio works with analog channels. • Digital Language works with digital channels. 1. From the CHANNELS menu, highlight Digital Language and press OK.
4 SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference. See the diagram on the next page for an explanation of the parts of the closed caption area. Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue.
4 • Background Color - Change the color of the background directly behind the text. • Background Opacity - Change the transparency of the background directly behind the text. • Window Color - Change the color of the closed captioning box. • Window Opacity - Change the opacity of the closed captioning box. Typical choices include: • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode.
4 RENAMING INPUTS (USING THE DEVICES MENU) Inputs can be renamed to make them easier to recognize on the Input menu (see Changing the Input Source on page 26). For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” Input Port To change the name of an input: VIZIO 1. Press the MENU button on the remote. The on-screen menu is displayed. NAME INPUT HDMI-1 2. Use the Arrow buttons on the remote to highlight Devices and press OK.
4 CHANGING THE TV SETTINGS Viewing System Information To view technical data and status information about your TV and network connection: Using the system menu, you can: • View technical system and networking information • Change the on-screen menu language System Information • Set the time zone and local setting Time & Local Settings • Set up parental controls View Mode • Open the WIDE menu Wide • Give the TV a name for it to work with DLNA-enabled devices • Set up CEC devices to
4 Changing the On-Screen Menu Language Setting the Time Zone Your TV can display the on-screen menu in different languages. To ensure the correct time is displayed when you press the GUIDE button, set the TV’s time zone: To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 1. Press the MENU button on the remote.
4 Using the Parental Controls Enabling or Disabling Program Ratings The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. To manage program content according to its rating, you must enable the Program Rating feature.
4 Changing the Parental Control Passcode Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed. If you use the parental controls, you should change the passcode to prevent children from accessing inappropriate material.
4 Changing the View Mode Settings Adjusting the Wide Mode (Aspect Ratio) You can resize the video content to fit while the menu is open. The TV can display images in five different modes: Normal, Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently. To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed.
4 Changing Your TV's DLNA Name Controlling Other Devices with CEC DLNA allows your TV to display content from DLNA-certified computers, cameras, tablets, and smartphones. The CEC function on your TV enables you to control devices connected to the HDMI (ARC) input with the included remote, without any programming. Using CEC, your VIZIO TV remote can control: To create a custom DLNA name for your TV: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2.
4 Turning the Power Indicator On or Off To begin device discovery: • From the CEC menu, highlight Device Discovery and press OK. The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on. Your TV begins looking for CEC devices connected to all of its HDMI inputs. When discovery is complete: • To turn the Power Indicator Light on or off: The CEC-compatible devices are listed below Device Discovery. 1.
4 Restoring the TV to Factory Default Settings Enabling and Disabling Smart Interactivity You can use the TV’s Reset & Admin menu to restore the TV to its factory default settings. Your TV can display program-related information as part of a broadcast. To enable or disable Smart Interactivity: All of the on-screen menu settings can be reset to the factory defaults. 1. Press the MENU button. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK.
4 USING THE GUIDED SETUP MENU The TV’s Setup App can be used to easily set up channels on the TV or to connect the TV to your network. To use guided setup: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Highlight Guided Setup and press OK. The GUIDED SETUP menu is displayed. VIZIO GUIDED SETUP Channel Setup Channel Setup - Set up the TV tuner. • Network Setup - Connect the TV to the Internet using your network. Zoom Normal Exit 2D 3D Network Setup 3.
4 USING THE INFO WINDOW The Info Window can be displayed by pressing the GUIDE or INFO buttons on the remote: • Press the GUIDE or INFO button once to display channel, input, and display information. • Press the GUIDE or INFO button twice to display the program title, program rating, audio information, and the start and end times of the program.
5 Using the USB Media Player USING THE USB MEDIA PLAYER Displaying USB Media To display your USB media: The USB media player allows you to connect a USB thumb drive to your TV and view photos. 1. Connect your USB thumb drive to the USB port on the side of the TV. 2. Use the Arrow buttons to highlight Yes and press the OK. If the dialog box disappears, press the V button on the remote to go the next step. 3. Use the Arrow buttons to highlight your USB device in the list and press OK. 4.
5 Connected Sources Displays connected USB devices. To change source, highlight it and press OK. Back Button Highlight this button and press OK to return to the previous screen. VIZIO USB1: Current Folder root Start Fullscreen Slideshow Sort by Name or Date View Thumbnails or Folders Adjust Slideshow Settings Photo Folder Contents This area displays the contents of the currently selected folder. You can browse files and folders using the Arrow and OK buttons on the remote.
5 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. VIZIO Music Progress Bar Displays the duration of the currently-playing song. The blue bar will lengthen as the song progresses. Album Art If included on the USB thumb drive and associated with your music, the album art will display here.
5 Back Button Highlight this button and press OK if you would like to return to the previous screen. Connected Sources Displays connected USB devices.
Using VIZIO Internet Apps Plus® (V.I.A. Plus) Vizio Internet Apps Plus (V.I.A. Plus) delivers popular online content to your TV. V.I.A. Plus features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more–all on demand. 6 Using the App Launcher Keys Use the App Launcher keys on the remote to launch the apps pictured on the buttons. Pressing a App Launcher key will also turn the TV on (if it is off).
6 USING THE FULLSCREEN V.I.A. PLUS APPS WINDOW The Fullscreen V.I.A. Plus Apps Window allows you to add and store Apps. The Apps on the first page are displayed in the Dock and Apps on additional pages can be moved to the Dock. To open the Fullscreen V.I.A. Plus Apps Window: 3. Press the OK button on the remote to launch the App. 4. To exit from an open App or to close the App Dock, press the Exit button on the remote. 1. Press the V Button on the remote twice. 2.
6 FULLSCREEN V.I.A. PLUS APPS WINDOW OVERVIEW The Fullscreen V.I.A. Plus Apps Window allows you to add, delete, and organize your Apps. The My Apps tab displays Apps that are already installed on your TV. The Apps on the first page are displayed in the V.I.A. Plus App Dock. Apps with a small lock icon in the right-hand corner cannot be deleted. • All Apps: Displays every App that is available for download.
6 CUSTOMIZING THE V.I.A. PLUS APPS WINDOW Deleting an App from the My Apps Tab You can add, delete, and move Apps around on your My Apps tab for a custom look and feel. Adding an App to the My Apps Tab To delete an App from your TV: 1. Use the Arrow buttons on the remote to highlight the App you wish to delete. 2. Press and hold the OK button. The following options appear: To add an App to your TV: 1. Use the Arrow buttons on the remote to highlight the App you wish to add.
6 Moving an App in My Apps You can organize your Apps on your My Apps tab by moving them where you want. To move the Apps on your My Apps tab: 3. Use the Arrow buttons to move the App to the desired location and press OK to place the App. When you can move the App, it appears as shown below. Note: App location, appearance, and availability subject to change without notice. 1. Use the Arrow buttons on the remote to highlight the App you wish to move. 2. Press and hold the OK button.
Troubleshooting & Technical Support Do you have questions? Find answers at SUPPORT.VIZIO.
A There is no sound. • Press Volume Up on the remote control. The TV displays “No Signal.” • Press the INPUT button on the remote control to select a different input source. • If you are using cable TV, satellite, or an antenna connected directly to the TV, scan for channels. See Finding Channels on page 43. There is no power. • Ensure the TV is plugged into a working electrical outlet. • Press the MUTE button on the remote to ensure mute is off. • Check the audio settings.
A I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. The image quality is not good. • For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables. • If you are using an antenna, the signal strength of the channel may be low.
B Specifications D32-D1 D32h-D1 D32x-D1 32" Class 32" Class 32" Class 31.50" 31.50" 31.50" 28.60" x 19.03" x 7.87" 28.60" x 17.06" x 2.55" 28.76” x 19.11” x 7.87” 28.76” x 17.14” x 2.55” 28.60” x 19.03” x 7.87” 28.60” x 17.06” x 2.55” 11.79 lbs 11.31 lbs 11.29 lbs 11.02 lbs 11.79 lbs 11.31 lbs Direct LED Direct LED Direct LED Refresh Rate: 120 Hz 60 Hz 60 Hz Clear Action: 240 N/A N/A 1920 x 1080 (1080p) 1366 x 768 (720p) 1920 x 1080 (1080p) 200,000:1 200,000:1 200,000:1 0.
B D32-D1 D32h-D1 D32x-D1 UL, cUL, NOM, FCC Class B, BETS-7/ UL, cUL, NOM, FCC Class B, BETS-7/ UL, cUL, NOM, FCC Class B, BETS-7/ Certifications: ICES-003 Class B, IC, IFETEL, HDMI ICES-003 Class B, IC, IFETEL, HDMI ICES-003 Class B, IC, IFETEL, HDMI (CEC, ARC), Dolby Digital PLUS (CEC, ARC), Dolby Digital PLUS (CEC, ARC), Dolby Digital PLUS Energy Star 7.0, NRCan, CONUEE, NOM-032 Energy Star 7.0, NRCan, CONUEE, NOM-032 Energy Star 7.
C Limited Warranty FOR UNITED STATES AND CANADA ONLY BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
C than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO.
C How the Law Applies This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law. that you always clear all personal information from the product before it is serviced, regardless of the servicer.
D Legal & Compliance Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Export Regulations Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”).
D Notice Declaración de México: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
© 2016 VIZIO INC. ALL RIGHTS RESERVED.
