VIZIO USER MANUAL Model D43-E2, D50-E1, D55-E0, & D65-E0
Safet ertificatio THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO TV. our TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer’s warranty does not cover user abuse or improper installations. • The power cord must be replaced when using different voltage than the voltage specified. or more information, contact your dealer. • • hen connected to a power outlet, power is always owing into your TV. To totally disconnect power, unplug the power cord. Follow instructions for moving your TV.
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
or DTS patents, see http patents.dts.com. Manufactured under license from DTS icensing imited. DTS, the Symbol, DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc. DTS, Inc. All ights eserved. This product qualifies for STA in the factory default” settings ans this is the setting in which power savings will be achieved.
Table Of Contents Table Of Contents ........................................................vi Front Panel ..........................................................................................7 Getting to Know Your TV .............................................7 Remote Control Front.........................................................................10 Replacing the Batteries ...................................................................10 Completing The First-Time Setup ..................
Getting to Know Your TV 1 REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator ashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the ower Indicator On or Off.
1 Ethernet - Connect an Ethernet cable to modem/ router. Coaxial - onnect a coaxial cable from cable, satellite, or antenna. Optical Audio Out - onnect an optical S DI audio device, such as home audio receiver. USB - onnect a S thumb drive to play photo, music, or video. Components - onnect a component or composite devices. RCA Audio Out- onnect an A audio device, such as sound bar. HDMI - onnect an HDMI device. HDMI - onnect an HDMI device. Power - ress to turn on the TV.
1 WALL-MOUNTING THE TV To mount your TV on a wall, you will need a wall mount. onsult the information on this page to find the appropriate mount for your TV. e sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall 1. Disconnect any cables connected to your TV. 2. lace the TV face-down on a clean, at, stable surface.
1 Replacing the Batteries USING THE REMOTE 1 2 3 4 5 6 7 8 9 10 11 12 14 13 15 16 17 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 18 19 20 1. 2. 3. 4. 17. 21 18. 19. 20. 21. Power - Turn TV on or Off. Input - Change the currently displayed input. A/V Controls - Control USB media player and some apps. Closed Captions - Open the closed caption menu. or video description hold key for seconds. Menu - Display the on-screen menu. Exit - Close the on-screen menu. Info - Display the info window.
Completing The First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. 2 Your TV should be installed and the power cord should be connected to an electrical outlet. • Your devices should be connected. • If you have a wireless network, have the network password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV. Choose your mode.
2 5 If the TV Signal channel scan screen appears, the TV will need to scan for channels, which takes several minutes. Use the arrow buttons on the remote to highlight Begin Scan and press OK. Note: Number of ports may differ by TV. Otherwise, use the Arrow and OK buttons on the remote to select the input your TV source is connected to. hen you are finished, the message “Setup is complete.” will appear. The First-Time Setup is complete.
2 ACCESSIBILITY SETTINGS VIZIO is committed to providing intuitive, user-friendly products. our new VIZIO TV offers several accessibility features that can help you get the most out of it. To access the Accessibility menu: 1. Press the Menu button on the remote control. 2. Use the Arrow and OK buttons to navigate and select System à Accessibility. • Talk Back - Turn Text-to-Speech Talk Back On or .
Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote.
3 CHANGING THE SCREEN ASPECT RATIO The TV can display images in five different modes ormal, Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Tip: The aspect ratio cannot be changed for Ultra HD content or for any video content on HDMI-5. Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include wide-screen movies and older television programs. To change the screen aspect ratio: 1.
3 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions. If you’ve changes to the settings for a picture mode, an asterisks appears after its name (see Saving a Custom Picture Mode). 3. Use the Arrow buttons on the remote to highlight Picture Mode, then use the Left/Right Arrow buttons to change the picture mode: • • To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2.
3 • Adjusting More Picture Settings Picture Size: Increase or decrease the vertical and horizontal size of the displayed picture. Use the Left/ Right Arrow buttons to adjust the horizontal size of the displayed picture. Use the Up/Down Arrow buttons to adjust the vertical size of the displayed picture. Press the OK button when you are finished. To adjust more picture settings: 1. From the PICTURE menu, use the Arrow buttons to highlight More Picture, and then press OK. 2.
3 Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Locking/Unlocking a Custom Picture Mode Picture Mode Edit Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources. • Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.
3 Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete a custom picture mode: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Delete Picture Mode, and then press OK. The DELETE PICTURE MODE window is displayed. To delete the user created Custom 1 picture mode, select the Delete button. Delete Cancel 2.
3 Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display color bar, at, and ramp test patterns. The Color Tuner, 11 Point White Balance, and test patterns allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter.
3 To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the SMPTE Test Pattern menu is displayed. 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Flat Test Pattern menu is displayed. 1.
3 ADJUSTING THE AUDIO SETTINGS • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track. To adjust the audio settings: • Digital Audio Out - Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system. Select Auto, PCM, Dolby D or Bitstream. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK.
3 Deleting the Custom Audio Mode To delete the custom audio mode that has been created: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight Delete Audio Mode and press OK. The TV displays, “To delete the user created custom audio mode, select the Delete button.” 4. Highlight Delete and press OK. 5. Press the EXIT button on the remote.
3 SETTING TIMERS Setti Setting the Timer hen activated, the TV s timer will turn the TV off after a set period of time. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Timers and press OK. The TIMERS menu is displayed. 3. Use the Left/Right Arrow buttons on the remote to highlight the period of time after which you want the TV to sleep: 30, 60, 90, 120, or 180 minutes.
3 USING THE NETWORK CONNECTION MENU Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu. You must disconnect the Ethernet cable to set up a wireless network connection. 1. Press the MENU button on the remote.
3 Connecting to a Hidden Network Testing Your Network Connection To connect to a wireless network whose network name (SSID) is not being broadcast: To test your network connection: 1. From the NETWORK menu, highlight Hidden Network and press OK. The ENTER ACCESS POINT NAME screen is displayed. 1. From the NETWORK menu, highlight Test Connection and press OK. VIZIO ENTER ACCESS POINT NAME Enter your access point name. This is used to connect to an access point with a hidden SSID. 2.
3 SETTING UP CHANNELS Selecting a Channel Source Select the type of tuner input you will be using. You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections. You can use the TV’s Channels menu to: • Select a Channel Source • Find Channels • Select channels to skip Channels not searched • Analog Audio Channel Source • Digital Audio Find Channel 1. From the CHANNELS menu, highlight Channel Source and press OK. The CHANNEL SOURCE menu displays.
3 Skipping Channels After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature. Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls.
3 LISTENING TO ALTERNATE AUDIO To use the Digital Audio feature: Changing the Analog Audio Language Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP). Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming. 1.
3 SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. If the program you are viewing is not being broadcast with closed captions, the TV will not display them. The Closed Captions menu does not appear when an HDMI or Component input is selected. 2. Use the Arrow buttons on the remote to highlight Closed Captions and press OK. The CLOSED CAPTIONS menu is displayed. 3.
3 Typical choices include: • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once. Background Text In the example below, the closed caption text is green, the background is black, and the window is red.
3 RENAMING DEVICES ON THE INPUT MENU You can rename the inputs to make them easier to recognize on the Input menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source. Input Port To change the name of an input: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Devices and press OK. The DEVICES menu is displayed. 3.
3 CHANGING THE TV SETTINGS Viewing System Information To view technical data and status information about your TV and network connection: Using the System menu, you can: VIZIO • View system information • Change the on-screen menu language System Information Set time zone and local settings Time & Local Settings • • 1. Press the MENU button on the remote. The on-screen menu is displayed.
3 Setting the Time and Local Settings Using the Parental Controls Enabling or Disabling Program Ratings To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone: The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. To manage program content according to its rating, you must enable the Program Rating feature. 1. Press the MENU button on the remote. The on-screen menu is displayed.
3 Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed. When this is the case, you can use the TV’s Rating Block feature to block content based on its rating. or a list of content ratings and their definitions, visit www.tvguidelines.org.
3 Changing the View Mode Settings ou can resi e the video content to fit while the menu is open. To change the view mode settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. VIZIO VIEW MODE Viewport Overlay Centered Overlay 3. Use the Arrow buttons on the remote to highlight View Mode and press OK. The VIEW MODE menu is displayed. 4.
3 Adjusting the CEC Settings The CEC function on your TV enables you to control devices connected to HDMI (ARC) input with the included remote, without any programming. Using CEC, your VIZIO TV remote can control: • ower On Off • Volume • Mute Not all HDMI devices support CEC. To enable, disable, or adjust CEC settings: 1. Set up your audio device and connect it to the HDMI-1 (HDMI Arc) input on the TV 2. On your audio device, select the HDMI ARC input 3. Press the MENU button on the remote.
3 USING THE RESET & ADMIN MENU 5. If you have changed the default parental control PIN, enter it now. You can use the TV’s Reset & Admin menu to restore the TV to its factory default settings. Restoring the TV to Factory Default Settings All of the on-screen menu settings can be reset to the factory defaults. The TV displays, “Select Reset to restore all TV settings to factory defaults and clear all account information.” 6. Highlight Reset and press OK. . ait for the TV to turn off.
3 USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio information, and the start and end times of the program. (Tuner Input only.
Using VIZIO Internet Apps Plus® (V.I.A. Plus) VIZIO Internet Apps Plus® (V.I.A. Plus) delivers popular online content to your TV. V.I.A. Plus features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more–all on demand. A high-speed Internet connection is required to receive product updates and to access online content. See Using the Network Connection Menu if your TV is not yet connected to your home network. USING THE V.I.A.
USING THE FULLSCREEN V.I.A. WINDOW The Fullscreen V.I.A. Plus window allows you to add and store Apps. The Apps on the first page are displayed in the Dock and Apps on additional pages can be moved to the Dock. To open the Fullscreen V.I.A. Plus Window: 1. Press the V Button on the remote twice. 2. Highlight an App by using the Arrow buttons on the remote. 3. Press the OK button on the remote to launch the App. 4. To exit from an open App or to close the App Dock, press the Exit button on the remote.
FULLSCREEN V.I.A. PLUS WINDOW OVERVIEW The Fullscreen V.I.A. Plus Window allows you to add, delete and organize your Apps. The My Apps tab displays Apps that are already installed on your TV. The Apps on the first page are displayed in the V.I.A. Plus Dock. Apps with a small lock icon in the right-hand corner cannot be deleted. The following tabs are located at the top of your Fullscreen V.I.A. Plus Window: • My Apps: Displays apps that are installed on your TV.
CUSTOMIZING THE V.I.A. PLUS WINDOW You can add, delete, and move apps around on your My Apps tab for a custom look and feel. Adding an App to the My Apps Tab To add an app to your TV: 1. Use the Arrow buttons on the remote to highlight one of the App Store tabs (Featured, Latest, All Apps, or Categories). Deleting an App from the My Apps Tab Moving an App in My Apps To delete an app from your TV: You can organize your Apps on your My Apps tab by moving them where you want. 1.
3. Use the Arrow buttons to move the app to the desired location and press OK to place the app. When you can move the app, it appears as shown below. Note: App location, appearance, and availability subject to change without notice.
Using the USB Media Player Using the USB Media Player The S Media layer allows you to connect a your TV to view photos 4 Preparing Your USB Drive to Play USB Media S thumb drive to To display S media, you must first save your photos onto a thumb drive S thumb drive must be formatted as AT S • The . • iles on the S thumb drive must end in a supported file extension . pg or . peg .
4 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected S devices. VIZIO Photo Folder Contents This area displays the contents of the currently selected folder. ou can browse files and folders using the Arrow and OK buttons on the remote. Back Button Highlight and press OK to return to left column. Current Folder Displays the folder path.
Troubleshooting & Technical Support A Do You Have Questions? Find Answers At SUPPORT.VIZIO.
A Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications.
A The remote is not responding. • Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones. The TV displays “No Signal.” • Press the INPUT button on the remote control to select a different input source. • There is no sound. • Press Volume Up on the remote control. • Press the MUTE button on the remote to ensure mute is off. • Check the audio settings. See Adjusting the Audio Settings.
A I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
S ecificatio s B D43-E2 Scree Si e ie a e Area Di a Sta d o Sta d 38.17” x 24.59” x 8.27” (96.95 x 62.47 x 21 cm) 28.77” x 16.96” x 2.99” (96.95 x 56.97 x 6.7 cm) Wei ht Sta d o Sta d 18.30 lbs (8.3 kg) 17.64 lbs (8.0 kg) D ac i ht Direct LED efresh ate 60 Hz eso utio 3840 x 2160p (UHD) u ic o trast atio i e ie i o itch A e 200,000:1 0.2451 mm (H) X 0.
B D50-E1 Scree Si e ie a e Area Di a Sta d o Sta d 44.40” x 27.97” x 10.04” (112.78 x 71.04 x 25.5 cm) 44.40” x 25.61” x 2.99” (112.78 x 65.04 x 7.6 cm) Wei ht Sta d o Sta d 27.34 lbs (12.40 kg) 26.68 lbs 12.10 kg) D ac i ht Direct LED efresh ate 60 Hz eso utio 3840 x 2160p (UHD) u ic o trast atio i e ie i o itch A e 200,000:1 0.285 mm (H) X 0.
B D55-E0 Scree Si e ie a e Area Di a Sta d o Sta d 48.98” x 30.69” x 10.59” (124.4 x 77.95 x 26.91 cm) 48.98” x 28.30” x 2.91” (124.4 x 71.89 x 7.4 cm) Wei ht Sta d o Sta d 32.85 lbs (14.90 kg) 31.97 lbs (14.50 kg) D ac i ht Direct LED efresh ate 60 Hz eso utio 3840 x 2160 (UHD) u ic o trast atio i e ie i o itch A e 5,000,000:1 0.315 mm (H) X 0.
B D65-E0 Scree Si e ie a e Area Di a Sta d o Sta d 57.67” x 35.76” x 11.34” (146.47 x 90.84 x 28.81 cm) 57.67” x 33.20” x 3.31” (146.47 x 84.33 x 8.4 cm) Wei ht Sta d o Sta d 52.92 lbs (24 kg) 50.72 lbs (23 kg) D ac i ht Direct LED efresh ate 60 Hz eso utio 3840 x 2160p (UHD) u ic o trast atio i e ie i o itch A e 5,000,000:1 0.372 mm (H) X 0.
Regulatory Information C FCC Class B Radio Interference Statement Notice Canada Notice for License-Exempt Radio Apparatus NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Limited Warranty UNITED STATES AND CANADA BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
D right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States).
Limited Warranty Mexico MEXICO BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT. Warrantor The warrantor under this warranty is VIZIO Sales & Marketing Mexico S. de R.L. de C.V.
D VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Legal Information D Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.com/privacy. configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc.
© 2017 VIZIO INC. ALL RIGHTS RESERVED.
