VIZIO QUICK START GUIDE Model: E320-B1
IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
TELEVISION ANTENNA CONNECTION PROTECTION Ground Clamp Antenna Lead In Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Electric Service Equipment • If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available Your can also contact our award-winning support team at: Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.
DOWNLOAD THE FULL USER MANUAL 1 2 Page shown is for illustrative purposes only. Actual page content will vary. Help VIZIO reduce paper waste. Download the Full User Manual for your TV. Using a computer, navigate to: http://store.VIZIO.com/support Enter the model number of the TV in the space above. You can download the Full User Manual under the Product Downloads section of the Support tab.
PACKAGE CONTENTS INPUT MENU EXIT OK BACK GUIDE CH VOL CH VOL 1 2 4 5 7 8 9 WIDE 0 — 3 6 VIZIO LED HDTV with Stand Remote Control with Batteries This Quick Start Guide Power Cord 3 x T4 16mm Phillips Screws 3 x M4 12mm Phillips Screws
USING THE REMOTE INPUT Change the currently-displayed input. EXIT Close the on-screen menu. INPUT VOLUME UP/DOWN Increase or decrease loudness of the audio. MUTE Turn the audio off or on. NUMBER PAD Manually enter a channel. WIDE Change the display mode. MENU EXIT OK Select the highlighted menu option. BACK Go to the previous on-screen menu. POWER Turn TV on or off. MENU Display the on-screen menu. ARROW Navigate the on-screen menu.
INSTALLING THE BASE 1 Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket.
2 Align the neck piece with the bottom of the TV and slide it into place as shown. Using a Phillips screwdriver, tighten the three (3) M4 12mm screws into the center of the neck piece to secure it to the TV. 3 Align the base with the neck and tighten the three (3) T4 16mm screws using a Phillips screwdriver. Place the TV on a flat, stable surface.
CONNECTING CONNECTING YOUR YOUR DEVICES DEVICES 1 Connect all of your devices first. Choose ONE connection type for each device. BACK OF TV White Red Red Red Blue White Yellow Green Match colored connectors to colored ports.
HDMI CABLE* • DIGITAL • HD VIDEO (1080p)** • HD AUDIO BEST Commonly-Connected Devices: COMPONENT CABLE* • ANALOG BETTER • HD VIDEO (1080i)** • STEREO AUDIO Cable or Satellite Boxes Match colored connectors to colored ports. COAXIAL CABLE* BETTER AV CABLE* GOOD • ANALOG • HD VIDEO (1080i)** • STEREO AUDIO • ANALOG • VIDEO (480i)** • STEREO AUDIO Match colored connectors to colored ports.
3 2 Remove the battery cover by pressing gently on the V logo and sliding away from the remote. Insert the included batteries. Gently slide the battery cover back into place. Connect the power cord to the back of the TV. The flat edge of the connector goes toward the outside of the TV. Plug the power cord into an electrical outlet.
4 5 Turn the TV on by pressing the Power button on the remote. The Setup App is displayed. Use the Arrow buttons on the remote to highlight Home Use and press OK. Follow the on-screen instructions to complete the first-time setup.
HELP TOPICS How do I return to the Setup App? • The on-screen menu has guided setup. Press MENU > Guided Setup. Select the type of setup you need and press OK. The Setup App begins. To reset the TV to factory defaults, press MENU > System > Reset & Admin > Reset TV to Factory Defaults. If you set a Parental Control Passcode, enter it now. Select Reset. Remember that all of your settings will be lost. There is a picture, but there is no sound. • • • Press the VOLUME UP button on the remote.
LEGAL / COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
